Shimano ALFINE Inter-11 Dealer's Manual page 24

INSTALLATION
Installation of the shifting cable
Disconnecting the shifting cable when removing the rear wheel from the frame
1
(A) (B) (C)
2
3
(A) (B)
Disconnect the cable from the cassette
(A)
joint when removing the rear wheel
from the frame.
Set the shift lever to 8 .
Pull the outer casing out from the outer
casing holder of the cassette joint, and
then remove the inner cable from the slit
in the bracket.
Remove the inner cable fixing bolt unit
from the cassette joint pulley.
24
(A)
Cassette joint
(A)
Bracket
(B)
Outer casing holder
(C)
Slit
(A)
Inner cable fixing bolt unit
(B)
Cassette joint pulley
NOTICE
If reinstalling the cable, refer to steps 2 to 4 in
"Cassette joint end".