Adjusting The Stopped Lever Position (Rapidfire Plus Mono Lever) - Shimano SL-U8000 Dealer's Manual

Adjustment

Adjusting the stopped lever position (RAPIDFIRE PLUS MONO lever)

Adjusting the stopped lever position (RAPIDFIRE
PLUS MONO lever)
The stopped lever position can be adjusted. After lever operation, the lever is kept in the adjusted position. If the
lever is operated again, the lever returns to its initial position.
Adjusting the stopped lever position must only be done after returning the lever to its initial position. If
the adjuster is moved during lever operation, the lever may be damaged.
SL-U8000
1. Turn the adjuster while pushing it towards the lever body.
The stopped lever position changes based on the position of the recessed area of the adjuster.
Adjuster
Stopped lever position (far)
Initial position
Stopped lever position (near)
12