Shimano ALFINE Inter-11 Dealer's Manual page 18

INSTALLATION
Installation of the hub to the frame
(A) (B)
3
Take up the slack in the chain and secure
the wheel to the frame with the cap
nuts.
When installing a part such as a
mudguard stay to the hub axle, install in
the order shown in the illustration.
(A) (C) (D)
(E) (B)
18
(A)
Non-turn washer
(B)
Cap nut
(C)
Carrier stay
(D)
Washer
(E)
Mudguard stay
Tightening torque
30 - 45 N·m
NOTICE
When installing the hub to the frame, the
chain guard may come off, so check that the
chain guard is securely installed so that it will
not come off.
If it is not fully installed, noise may be
generated.
Chain guard