DM-F Series Monitor
Figure 3-32: Secure the Mounting Clamp Holders
Step 2:
Slide the rear of the DM-F series LCD monitor through the rack/cabinet bracket
until the aluminum frame is flush against the front of the bracket (Figure 3-33).
Figure 3-33: Slide into the Rack/Cabinet Bracket
Step 3:
Insert the panel mounting clamps into the pre-formed holes of the clamp holders
(Figure 3-34).
Step 4:
Tighten the screws that pass through the rack mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the bracket (Figure 3-34).
Page 45