Figure 5-10: Tighten The Panel Mounting Clamp Screws (Afl-12M); Table 5-5: Afl Series Vesa Standard - IEI Technology AFOLUX M Series User Manual

PICOe-6612 5.25" CPU Card

Figure 5-10: Tighten the Panel Mounting Clamp Screws (AFL-12M)

Tighten the screws that pass through the panel mounting clamps until the plastic
Step 5:
caps at the front of all the screws are firmly secured to the panel (
5.6.3 Wall Mounting
The AFL series industrial monitor has Video Electronics Standards Association (VESA)
standard mounting holes tapped into the rear panel. The standard holes are M4 set at
75mm x 75mm and/or 100mm x 100mm apart and support wall, arm or stand mount.
T able 5-5 lists the VESA layouts of the AFL series industrial monitor.
9 3 2 H 9 3 2 H
Model
AFL-07M/08MH
AFL-10M/12M
AFL-15M/17M/19M

Table 5-5: AFL Series VESA Standard

VESA Standard
75mm x 75mm
75mm x 75mm and 100mm x 100mm
100mm x 100mm
F igure 5-10).
Step 5:
9 3 1 H 9 3 1 H
Page 103