IEI Technology DM-F12A/R-R10 User Manual

IEI Technology DM-F12A/R-R10 User Manual

Dm-f series, 12”~24” lcd monitor displayport/hdmi/vga, ip 65 protection, rohs
Hide thumbs Also See for DM-F12A/R-R10:
Table of Contents

Advertisement

DM-F S e rie s Mo n ito r
DM Series Industrial Monitor
MODEL:
DM-F S e rie s
12"~24" LCD Mo n ito r
Dis p la yP o rt/HDMI/VGA, IP 65 P ro te c tio n , Ro HS
Us e r Ma n u a l
P a g e I
Re v. 1.00 – 25 Ma rc h , 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DM-F12A/R-R10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IEI Technology DM-F12A/R-R10

  • Page 1 DM-F S e rie s Mo n ito r DM Series Industrial Monitor MODEL: DM-F S e rie s 12”~24” LCD Mo n ito r Dis p la yP o rt/HDMI/VGA, IP 65 P ro te c tio n , Ro HS Us e r Ma n u a l P a g e I Re v.
  • Page 2 DM-F S e rie s Mo n ito r Re vis io n Date Version Changes 25 March, 2014 1.00 Initial Release P a g e II...
  • Page 3 DM-F S e rie s Mo n ito r Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
  • Page 4: Table Of Contents

    DM-F S e rie s Mo n ito r Ta b le o f Co n te n ts 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 M ..................... 3 ODEL ARIATIONS 1.4 A ......................
  • Page 5 DM-F S e rie s Mo n ito r 4.2 P ................24 INSTALLATION REPARATION 4.2.1 Tools ......................... 24 4.2.2 Voltage Select Jumper Settings ................ 24 4.3 E ............25 XTERNAL ERIPHERAL EVICE ONNECTION 4.3.1 DisplayPort Connector ..................26 4.3.2 9V-36V Terminal Block ..................26 4.3.3 9V-36V DC Jack ....................
  • Page 6 DM-F S e rie s Mo n ito r 6.5 C ................55 ALIBRATING THE OUCH CREEN A SAFETY PRECAUTIONS ................... 58 A.1 S ....................59 AFETY RECAUTIONS A.1.1 General Safety Precautions ................59 A.1.2 Anti-static Precautions ..................60 A.2 M ............
  • Page 7 DM-F S e rie s Mo n ito r Lis t o f Fig u re s Figure 1-1: DM-F Series ......................... 2 Figure 1-2: Typical Monitor Front View ..................4 Figure 1-3: Typical Rear View ......................5 Figure 1-4: Connectors (DM-F12A/15A/17A) ................5 Figure 1-5: Connectors (DM-F22A/24A) ..................
  • Page 8 DM-F S e rie s Mo n ito r Figure 4-20: VESA Mounting Holes ....................37 Figure 4-21: Monitor Stand Mounting ..................38 Figure 4-22: Monitor Arm Mounting ....................39 Figure 5-1: OSD Keypad ......................41 Figure 5-2: Image Menu .......................43 Figure 5-3: Color Settings ......................44 Figure 5-4: Display Menu ......................45 Figure 5-5: System Menu ......................46 Figure 5-6: Input Options ......................47...
  • Page 9 DM-F S e rie s Mo n ito r Figure C-26: Windows Vista Error ....................79 Figure C-27: Install as Administrator ..................80 Figure C-28: Firmware Incompatibility ..................80 Figure C-29: DDC Port Failure .....................81 P a g e IX...
  • Page 10 DM-F S e rie s Mo n ito r Lis t o f Ta b le s Table 1-1: DM-F Series Model Variations ..................3 Table 1-2: DM-F Series Specifications ..................8 Table 2-1: Packing List .........................16 Table 2-2: Optional Items ......................17 Table 3-1: AV-6038 Peripheral Interface Connectors ..............20 Table 3-2: AV-6038 Rear Panel Connectors ................21 Table 4-1: LCD Panel Voltage Select Jumper Settings .............24...
  • Page 11: Introduction

    DM-F S e rie s Mo n ito r Ch a p te r In tro d u c tio n P a g e 1...
  • Page 12: Overview

    DM-F S e rie s Mo n ito r 1.1 Ove rvie w Figure 1-1: DM-F Series The DM-F series LCD monitor is the latest member of IEI’s line of sophisticated LCD designs, and it has been improved to be RoHS compliant. It is designed to fit industrial automation, or any other applications that require minimum installation space and flexible configuration.
  • Page 13: Model Variations

    1.3 Mo d e l Va ria tio n s The DM-F series LCD monitor base models have a variety of variants. The model variations are listed in Table 1-1. Model Number Touch Screen DM-F12A/R-R10 W/ USB resistive touch screen 12” DM-F12A/PC-R10 W/ USB projected capacitive touch screen...
  • Page 14: External Overview

    DM-F S e rie s Mo n ito r Full-service receptionist kiosk Hospital self-registration terminal Interactive photo kiosk Video rental kiosk Self-service POS terminal 1.5 Exte rn a l Ove rview The DM-F series LCD monitors are durable devices that can be used in harsh industrial environments.
  • Page 15: Rear View

    DM-F S e rie s Mo n ito r 1.5.2 Re a r Vie w The rear panel provides access to retention screw holes that support various mounting. There is a 7-key membrane OSD keypad on the rear panel. Figure 1-3 shows a typical DM-F rear panel. Figure 1-3: Typical Rear View 1.5.3 Co n n e c to rs Figure 1-4 and Figure 1-5 shows the bottom panel of the DM-F series LCD monitor.
  • Page 16: Figure 1-5: Connectors (Dm-F22A/24A)

    DM-F S e rie s Mo n ito r Figure 1-5: Connectors (DM-F22A/24A) P a g e 6...
  • Page 17: Technical Specifications

    DM-F S e rie s Mo n ito r 1.6 Te c h n ic a l Sp e c ific a tio n s Table 1-2 shows the DM-F series technical specifications. Model DM-F12A DM-F15A DM-F17A DM-F22A DM-F24A LCD Display 12"...
  • Page 18: Certifications

    DM-F S e rie s Mo n ito r Model DM-F12A DM-F15A DM-F17A DM-F22A DM-F24A Weight (Net/Gross) 2.7/4.9 3.5/5.5 4.4/7.1 6.3/9.6 7.6/10.9 Operating -20°C ~ 60°C (with air flow) -10°C ~ 50°C (with air flow) Temperature Storage -20°C ~ 70°C -20°C ~ 60°C Temperature Humidity...
  • Page 19: Physical Dimensions

    DM-F S e rie s Mo n ito r 1.8 P h ys ic a l Dim e n s io n s The following sections describe the physical dimensions for each model of the DM-F series LCD monitor. 1.8.1 DM-F12A P h ys ic a l Dim e n s io n s The physical dimensions of the DM-F12A are shown in Figure 1-6.
  • Page 20: Dm-F15A Physical Dimensions

    DM-F S e rie s Mo n ito r 1.8.2 DM-F15A P h ys ic a l Dim e n s io n s The physical dimensions of the DM-F15A are shown in Figure 1-7. Figure 1-7: DM-F15A Physical Dimensions (millimeters) P a g e 10...
  • Page 21: Dm-F17A Physical Dimensions

    DM-F S e rie s Mo n ito r 1.8.3 DM-F17A P h ys ic a l Dim e n s io n s The physical dimensions of the DM-F17A are shown in Figure 1-8. Figure 1-8: DM-F17A Physical Dimensions (millimeters) P a g e 11...
  • Page 22: Dm-F22A Physical Dimensions

    DM-F S e rie s Mo n ito r 1.8.4 DM-F22A P h ys ic a l Dim e n s io n s The physical dimensions of the DM-F22A are shown in Figure 1-9. Figure 1-9: DM-F22A Physical Dimensions (millimeters) P a g e 12...
  • Page 23: Dm-F24A Physical Dimensions

    DM-F S e rie s Mo n ito r 1.8.5 DM-F24A P h ys ic a l Dim e n s io n s The physical dimensions of the DM-F24A are shown in Figure 1-10. Figure 1-10: DM-F24A Physical Dimensions (millimeters) P a g e 13...
  • Page 24: Unpacking

    DM-F S e rie s Mo n ito r Chapter Un p a c kin g P a g e 14...
  • Page 25: Unpacking Procedure

    DM-F S e rie s Mo n ito r 2.1 Un pa c kin g P ro c e du re To unpack the DM-F series LCD monitor, follow the steps below: WARNING: The front side LCD screen has a protective plastic cover stuck to the screen.
  • Page 26: Packing List

    DM-F S e rie s Mo n ito r 2.2 P a c kin g Lis t The DM-F series monitor is shipped with the following components: Qu a n tity Ite m Im a g e DM-F series USB Cable (For touch screen) (P/N: 32001-006100-100-RS) VGA Cable (P/N: 32000-036200-RS)
  • Page 27: Optional Items

    DM-F S e rie s Mo n ito r 2.3 Op tio n a l Ite m s The following items are optional accessories for the DM-F series monitor: Ite m DM-F12A DM-F15A DM-F17A DM-F22A DM-F24A ARM-11-RS ARM-31-RS Stand STAND-A19-RS STAND-C19-RS STAND-A12-RS STAND-B19-RS...
  • Page 28: Ad Board

    DM-F S e rie s Mo n ito r Ch a p te r AD Bo a rd P a g e 18...
  • Page 29: Ad Board Overview

    DM-F S e rie s Mo n ito r 3.1 AD Bo a rd Ove rvie w The DM-F series LCD monitor AD board provides a wide variety of control interfaces, receiving and managing interface signals from a CPU card through cabling. The following sections describe each AD board in detail.
  • Page 30: Av-6038 Rear Panel Connectors

    DM-F S e rie s Mo n ito r Co n n e c to r Typ e La b e l Audio speaker output connector 4-pin wafer connector Audio_LOUT1 Audio speaker output connector 4-pin wafer connector Audio_ROUT1 RS-232 input connector 6-pin wafer connector RS232_1 Power input connector...
  • Page 31: Table 3-2: Av-6038 Rear Panel Connectors

    DM-F S e rie s Mo n ito r USB connector USB 2.0 USB1 VGA connector 15-pin VGA connector VGA1 Table 3-2: AV-6038 Rear Panel Connectors P a g e 21...
  • Page 32: Installation

    DM-F S e rie s Mo n ito r Ch a p te r In s ta lla tio n P a g e 22...
  • Page 33: Installation Precautions

    DM-F S e rie s Mo n ito r 4.1 In s ta lla tio n P re c a u tio n s When installing the DM-F series LCD monitor, please follow the precautions listed below:  Read the user manual: The user manual provides a complete description of the DM-F series LCD monitor, installation instructions and configuration options.
  • Page 34: Pre - Installation Preparation

    DM-F S e rie s Mo n ito r 4.2 P re -in s ta lla tio n P re pa ra tio n 4.2.1 To o ls Before installing the DM-F series LCD monitor, make sure the following tools are on hand: ...
  • Page 35: External Peripheral Device Connection

    DM-F S e rie s Mo n ito r 4.3 Exte rn a l P e rip h e ra l De vic e Co n n e c tio n The external peripheral interface panel connectors for the DM-F series industrial monitors are listed below.
  • Page 36: Displayport Connector

    DM-F S e rie s Mo n ito r 4.3.1 Dis p la yP o rt Co n n e c to r The DisplayPort connector transmits a digital signal to compatible DisplayPort display devices such as a TV or computer screen. DESCRIPTION DESCRIPTION ML_L3N...
  • Page 37: 36V Dc Jack

    DM-F S e rie s Mo n ito r Figure 4-4: 3-pin Terminal Block 4.3.3 9V-36V DC J a c k The power connector connects to the 9V-36V DC power adapter. Figure 4-5: 9V-36V DC Jack 4.3.4 HDMI Co n n e c to r The HDMI connector connects to a display device with HDMI interface.
  • Page 38: Rs-232 For Touch Panel Connector (Reserved For Resistive Touch Ato)

    DM-F S e rie s Mo n ito r DESCRIPTION DESCRIPTION Table 4-3: HDMI Connector Pinouts Figure 4-6: HDMI Connector 4.3.5 RS -232 fo r To uc h P a n e l Co n n e c to r (Re s e rve d fo r re s is tive to u c h ATO) Use the rear panel standard RS-232 DB-9 female touch panel connector to connect the monitor to the system graphics interface.
  • Page 39: Vga Connector

    DM-F S e rie s Mo n ito r USB20_N11 USB20_P11 Table 4-5: USB Touch Panel Connector Pinouts Figure 4-8: USB Touch Panel Connector 4.3.7 VGA Co n n e c to r Use the rear panel standard 15-pin female VGA connector to connect the monitor to the system graphics interface.
  • Page 40: Panel Mounting

    DM-F S e rie s Mo n ito r When mounting the monitor take care to tighten the retention screws or bolts until fully secure, but do not over tighten. Over tightening the retention screws or bolts may cause them to become stripped, rendering them useless. 4.4.1 P a n e l Mo u n tin g Each model of the DM-F series LCD monitor has a series of mounting slots located on the top and bottom panel for mounting the monitor to a panel.
  • Page 41: Figure 4-10: Dm-F12A Cutout Dimensions (Unit: Mm)

    DM-F S e rie s Mo n ito r Figure 4-10: DM-F12A Cutout Dimensions (Unit: mm) Figure 4-11: DM-F15A Cutout Dimensions (Unit: mm) Figure 4-12: DM-F17A Cutout Dimensions (Unit: mm) Figure 4-13: DM-F22A Cutout Dimensions (Unit: mm) P a g e 31...
  • Page 42: Cabinet And Rack Installation

    DM-F S e rie s Mo n ito r Figure 4-14: DM-F24A Cutout Dimensions (Unit: mm) Slide the monitor through the hole until the aluminum frame is flush against the S te p 3: panel. Insert the panel mounting clamps into the pre-formed holes along the edges of S te p 4: the monitor, behind the metal frame.
  • Page 43: Figure 4-16: Secure The Cabinet/Rack Bracket

    DM-F S e rie s Mo n ito r S te p 1: The back of the metal frame surrounding the DM-F series LCD monitor has several retention screw holes for a cabinet/rack installation bracket. NOTE: When purchasing a cabinet/rack installation bracket, make sure it is compatible with both the monitor and the cabinet/rack into which the monitor is installed.
  • Page 44: Figure 4-17: Install Into A Cabinet/Rack

    DM-F S e rie s Mo n ito r S te p 5: Slide the monitor with the attached cabinet/rack bracket into a rack or cabinet (Figure 4-17). Figure 4-17: Install into a Cabinet/Rack S te p 6: Once the monitor with the attached cabinet/rack has been properly inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to the front of the rack or cabinet (Figure 4-17).
  • Page 45: Wall Mounting

    DM-F S e rie s Mo n ito r 4.4.3 Wa ll Mo u n tin g CAUTION: Due to safety concerns, it is highly recommended to use the VESA mounting kits provided by IEI for wall, stand and arm mounting. If the VESA mounting kit is purchased separately, please make sure the mounting kit is UL-listed.
  • Page 46: Figure 4-19: Mount The Chassis

    DM-F S e rie s Mo n ito r S te p 6: Insert the four monitor mounting screws provided in the wall mounting kit into the four screw holes on the real panel of the monitor and tighten until the screw shank is secured against the rear panel (Figure 4-19).
  • Page 47: Monitor Stand Installation

    DM-F S e rie s Mo n ito r 4.4.4 Mo n ito r Sta n d In s ta lla tio n The DM-F series LCD monitor has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The standard holes are M4 set at 100m x 100mm apart (Figure 4-20).
  • Page 48: Monitor Arm Installation

    DM-F S e rie s Mo n ito r Figure 4-21: Monitor Stand Mounting 4.4.5 Mo n ito r Arm In s ta lla tio n The DM-F series LCD monitor has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The standard holes are M4 set at 100m x 100mm apart (Figure 4-20).
  • Page 49: Figure 4-22: Monitor Arm Mounting

    DM-F S e rie s Mo n ito r Figure 4-22: Monitor Arm Mounting P a g e 39...
  • Page 50: On-Screen-Display (Osd) Controls

    DM-F S e rie s Mo n ito r Ch a p te r On -S c re e n -Dis p la y (OS D) Co n tro ls P a g e 40...
  • Page 51: User Mode Osd Structure

    DM-F S e rie s Mo n ito r 5.1 Us e r Mo d e OS D Stru c tu re 5.1.1 OS D Ke ypa d There are several on-screen-display (OSD) control buttons of the OSD keypad on the monitor rear panel.
  • Page 52: Osd Menu Structure

    DM-F S e rie s Mo n ito r 5.1.2 OS D Me n u Stru c tu re Table 5-1 shows the OSD menu structure for all models of the DM-F series LCD monitor. Level 0 Level 1 Level 2 Value Image Brightness...
  • Page 53: Using The Osd

    DM-F S e rie s Mo n ito r 5.2 Us in g th e OS D OSD menu options are described below. 5.2.1 Im a g e Me n u Image menu features are shown in Figure 5-2. Figure 5-2: Image Menu The brightness option adjusts the brightness of screen.
  • Page 54: Color Setting

    DM-F S e rie s Mo n ito r 5.2.1.1 Co lo r S e ttin g Color settings are shown in Figure 5-2. Figure 5-3: Color Settings auto Automatically adjusts the color settings. This item allows adjustment of the following items. Color temp ...
  • Page 55: System Menu

    DM-F S e rie s Mo n ito r Figure 5-4: Display Menu Automatically adjusts the LCD screen position. Auto Adjust Phase Adjusts the input signal (Analog only) Adjusts the dot clock position Clock Display Position Adjusts the horizontal and vertical position of the display screen Display Mode This item allows adjustment of the Gamma.
  • Page 56: Input

    DM-F S e rie s Mo n ito r Figure 5-5: System Menu Input Allows selection of input device to use. (Figure 5-6) OSD Settings Provides options for OSD configuration. (Figure 5-7) Provides information on the LCD monitor, such as firmware version, Information release date and input resolution.
  • Page 57: Figure 5-6: Input Options

    DM-F S e rie s Mo n ito r Figure 5-6: Input Options Input options are described below. Display Port This item sets the input device to display port. This item sets the input device to VGA. This item sets the input device to DVI/HDMI. DVI/HDMI autoscan Selects the input device to use automatically.
  • Page 58: Osd Settings

    DM-F S e rie s Mo n ito r 5.2.3.2 OS D S e ttin g s The OSD settings are shown in Figure 5-7. Figure 5-7: OSD Settings Menu OSD settings are described below. Determines how many seconds the OSD screen stays on screen Timer before it disappears when OSD is left unattended.
  • Page 59: Software Drivers

    DM-F S e rie s Mo n ito r Ch a p te r S o ftwa re Drive rs P a g e 49...
  • Page 60: Introduction

    DM-F S e rie s Mo n ito r 6.1 In tro d u c tio n The touch panel controller enables analog resistive touch panels for four-wire, five-wire & eight-wire models. The controller directly communicates with the PC system through the touch panel communications interface.
  • Page 61: Touch Panel Driver Installation

    DM-F S e rie s Mo n ito r The default touch screen interface for the DM-F series monitor is USB interface. The RS-232 interface is only reserved for resistive touch ATO  RS-232 Interface: If the touch screen interface connection is an RS-232 connection, connect the RS-232 connector on the single board computer to the DB-9 connector of the DM-F series monitor.
  • Page 62: Figure 6-1: Setup Icon

    DM-F S e rie s Mo n ito r Figure 6-1: Setup Icon S te p 4: Double click the setup icon in Figure 6-1. The Welcome screen in Figure 6-2 appears. S te p 5: Figure 6-2: Welcome Screen Click Next to continue.
  • Page 63: Figure 6-3: License Agreement

    DM-F S e rie s Mo n ito r Figure 6-3: License Agreement S te p 8: The installation destination screen appears. See Figure 6-4. Click Install. Figure 6-4: Initiate Install The installation of the program begins. See Figure 6-5. S te p 9: P a g e 53...
  • Page 64: Figure 6-5: Installation Starts

    DM-F S e rie s Mo n ito r Figure 6-5: Installation Starts S te p 10: When the installation is complete, the complete screen appears. See Figure 6-6. To complete the installation process click Finish. Figure 6-6: Finish Installation P a g e 54...
  • Page 65: Change The Touch Screen Interface

    DM-F S e rie s Mo n ito r 6.4 Ch a n g e th e To u c h S c re e n In te rfa c e If the touch screen interface must be changed from an RS-232 interface to a USB interface or, from a USB interface to an RS-232 interface, the following steps must be followed.
  • Page 66: Figure 6-8: Penmount Monitor Popup Menu

    DM-F S e rie s Mo n ito r Figure 6-8: PenMount Monitor Popup Menu Click Control Panel in the pop up menu shown in Figure 6-8. S te p 5: S te p 6: The configuration screen in Figure 6-9 appears. Figure 6-9: Configuration Screen S te p 7: Double click the PenMount 6000 icon as shown in Figure 6-9.
  • Page 67: Figure 6-10: Calibration Initiation Screen

    DM-F S e rie s Mo n ito r Figure 6-10: Calibration Initiation Screen The calibration screen in is shown. See Figure 6-11. S te p 10: Figure 6-11: Calibration Screen S te p 11: Follow the instructions. The user is asked touch the screen at five specified points after which the screen is calibrated.
  • Page 68: A Safety Precautions

    DM-F S e rie s Mo n ito r Ap p e n d ix S a fe ty P re c a u tio n s P a g e 58...
  • Page 69: Safety Precautions

    DM-F S e rie s Mo n ito r WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the DM-F Series. A.1 S a fe ty P re c a u tio n s Please follow the safety precautions outlined in the sections that follow: A.1.1 Ge n e ra l S a fe ty P re c a u tio n s Please ensure the following safety precautions are adhered to at all times.
  • Page 70: Anti-Static Precautions

    DM-F S e rie s Mo n ito r A.1.2 An ti-s ta tic P re c a u tio n s WARNING: Failure to take ESD precautions during the installation of the DM-F Series may result in permanent damage to the DM-F Series and severe injury to the user.
  • Page 71: Cleaning Tools

    DM-F S e rie s Mo n ito r  The interior of the DM-F Series does not require cleaning. Keep fluids away from the DM-F Series interior.  Be cautious of all small removable components when vacuuming the DM-F Series.
  • Page 72: B Certifications

    DM-F S e rie s Mo n ito r Ap p e n d ix Ce rtific a tio n s P a g e 62...
  • Page 73: R Ohs Compliant

    DM-F S e rie s Mo n ito r B.1 Ro HS Co m p lia n t All models in the DM-F LCD monitor series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant.
  • Page 74: C Smartosd

    DM-F S e rie s Mo n ito r Ap p e n d ix s m a rtOS D P a g e 64...
  • Page 75: Iei Smart Osd Quick Installation Guide

    DM-F S e rie s Mo n ito r C.1 IEI s m a rtOS D Qu ic k In s ta lla tio n Gu id e IEI smartOSD is a proprietary On-Screen-Display (OSD) software solution from IEI that enables easy, remote monitor setting adjustments in a Windows environment.
  • Page 76: Figure 6-12: Smartosd Welcome Screen

    DM-F S e rie s Mo n ito r Figure 6-12: smartOSD Welcome Screen S te p 4: Click Next to continue. The Folder Select screen in Figure 6-13 appears. S te p 5: Figure 6-13: smartOSD Folder Select Screen Select the installation folder in Figure 6-13 shown above.
  • Page 77: Figure 6-14: Smartosd Confirm Installation

    DM-F S e rie s Mo n ito r Figure 6-14: smartOSD Confirm Installation S te p 9: Confirm the installation by clicking Next in the screen above. S te p 10: The program starts to install and the progress bar shown in Figure 6-15 appears. Figure 6-15: smartOSD Installation Progress S te p 11: When the installation is complete the “Complete Installation”...
  • Page 78: Software Illustration

    DM-F S e rie s Mo n ito r Figure 6-16: smartOSD Installation Complete S te p 12: Click Close in the screen above. S te p 13: After quick setup is complete, the IEI smartOSD wizard logo appears on the desktop as shown in the screen below.
  • Page 79 DM-F S e rie s Mo n ito r NOTE: To update the display setting status immediately, push the refresh button on every page To turn the system on, press ALT + P. Ite m Ele m e n ts Management Save/Load File Power Management...
  • Page 80: Table C-1: Smartosd Menu Structure

    DM-F S e rie s Mo n ito r Auto Brightness (disabled in the DM-F Series) Main Source Input (YPbPr, S-Video and CVBS disabled) Volume (disabled in the DM-F Series) Factory Presets/OSD Lock/OSD Unlock Mute (disabled in the DM-F Series) Table C-1: SmartOSD Menu Structure P a g e 70...
  • Page 81: Manage Page

    DM-F S e rie s Mo n ito r C.4.1 Ma n a g e P a g e Figure C-17: Manage Page P a g e 71...
  • Page 82: Edid Page

    DM-F S e rie s Mo n ito r C.4.2 EDID P a g e Figure C-18: EDID Page P a g e 72...
  • Page 83: Image Page

    DM-F S e rie s Mo n ito r C.4.3 Im a g e P a g e Figure C-19: Image Page P a g e 73...
  • Page 84: Display Page (For Analog Signal)

    DM-F S e rie s Mo n ito r C.4.4 Dis p la y P a g e (fo r a n a lo g s ig n a l) Figure C-20: Display Page P a g e 74...
  • Page 85: Color Page

    DM-F S e rie s Mo n ito r C.4.5 Co lo r P a g e Figure C-21: Color Page P a g e 75...
  • Page 86: Pip Page

    DM-F S e rie s Mo n ito r C.4.6 P IP P a ge NOTE: The functions in the PIP page are only available in the MLCD-KIT Series and AFOLUX Series monitors. Figure C-22: PIP Page P a g e 76...
  • Page 87: System Page

    DM-F S e rie s Mo n ito r C.4.7 S ys te m P a g e Figure C-23: System Page NOTE: Some of the functions in the System Page are only available to some of the IEI LCD series as following: ...
  • Page 88: About Page

    DM-F S e rie s Mo n ito r C.4.8 Ab o u t P a g e Figure C-24: About Page P a g e 78...
  • Page 89: Smart Osd Faq

    DM-F S e rie s Mo n ito r C.5 s m a rtOS D FAQ For troubleshooting, please see the steps below: C.5.1 Win d ows 2000 In s ta lla tio n Fa ilu re Installation fails under Windows 2000 and shows the following image: Figure C-25: DLL Missing Solution: Download and install service pack Windows Installer 3.1 C.5.2 Vis ta In s ta lla tio n Fa ilu re...
  • Page 90: Model Failure

    DM-F S e rie s Mo n ito r Solution: Install SmartOSD.exe as the administrator authority Figure C-27: Install as Administrator C.5.3 Mo d e l Fa ilu re The Model Fail error message shown below appears. Figure C-28: Firmware Incompatibility Solution: SmartOSD only supports firmware version 2.0 and following versions.
  • Page 91: Ddc Port Failure

    DM-F S e rie s Mo n ito r C.5.4 DDC P o rt Fa ilu re The DDC port fail error message shown below appears. Figure C-29: DDC Port Failure Solutions:  Check VGA or DVI cable  Check an IEI monitor is being used ...

Table of Contents