IEI Technology AFL M Series User Manual

7"-19" multimedia touch monitor

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

page of 227

/ 227
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

AFL M Series LCD Monitor

Page i

Table of Contents

Need help?

Do you have a question about the AFL M Series and is the answer not in the manual?

Questions and answers

Summary of Contents for IEI Technology AFL M Series

Page 1 AFL M Series LCD Monitor Page i...
Page 2 AFL M Series LCD Monitor Revision Date Version Changes 2009-09-29 1.11 Added screw torque warning 2007-12-5 1.10 Added AFL-10M model information Added USB touch screen feature to 7” to 12.1” models Added USB touch screen models for 15” to 19” models Added smartOSD function and smartOSD appendix Added 7”...
Page 3 AFL M Series LCD Monitor Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
Page 4 AFL M Series LCD Monitor Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text.
Page 5 AFL M Series LCD Monitor CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permanent damage to the AFL series monitor. Please take caution messages seriously. NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes.
Page 6 To contact an IEI sales representative, please send an email to sales@iei.com.tw. The items listed below should all be included in the AFL M series package. 1 x AFL M Series industrial LCD monitor 1 x Power adapter...
Page 7: Table Of Contents
AFL M Series LCD Monitor Table of Contents INTRODUCTION..................... 1 1.1 AFL M S LCD M ..............3 ERIES ONITOR VERVIEW 1.1.1 Added Features ....................3 1.1.2 Standard Features ....................3 1.1.3 IEI smartOSD..................... 4 1.1.4 Model Variations ....................4 1.2 E...
Page 8 AFL M Series LCD Monitor 2.6.3 Wall Mounting....................25 2.6.4 Monitor Arm or Stand Mounting..............26 LCD AND TOUCH PANEL SPECIFICATIONS ..........27 3.1 LCD S ....................29 PECIFICATIONS 3.1.1 LCD Overview ....................29 3.1.2 AFL-07M LCD Specifications................29 3.1.3 AFL-08MH LCD Specifications............... 30 3.1.4 AFL-10M LCD Specifications................
Page 9 AFL M Series LCD Monitor 4.2.7 IR Sensor Connector ..................54 4.2.8 LVDS Signal Output Connector (AFL-08MH/10M/12M only)......55 4.2.9 Power Output Connector ................. 56 4.2.10 Remote Control Connector ................57 4.2.11 TTL Signal Output Connector (AFL-07M Model Only)......... 58 4.2.12 Touch Panel Connector..................
Page 10 AFL M Series LCD Monitor 4.6.11 RS-232 Serial Port Connector................ 84 4.6.12 USB Connector ....................85 4.7 AV-6962 O ................. 86 BOARD UMPERS 4.7.1 LCD Panel Voltage Select Jumper ..............87 4.8 AV-6962 E ........... 88 XTERNAL ANEL ONNECTORS 4.8.1 Audio Jack......................88 4.8.2 Component Video Connector ................
Page 11 AFL M Series LCD Monitor 5.5.4.1 AFL-15M/17M/19M Wall Mounting............114 5.5.5 Monitor Stand Installation ................116 5.5.6 Arm Mounting ....................117 ON-SCREEN-DISPLAY (OSD) CONTROLS ..........121 6.1 U OSD S ................123 TRUCTURE 6.1.1 OSD Buttons....................123 6.1.2 OSD Menu Structure ..................124 6.2 U...
Page 12 AFL M Series LCD Monitor A.1.1 General Safety Precautions ................166 A.1.2 Anti-static Precautions .................. 167 A.2 M ............167 AINTENANCE AND LEANING RECAUTIONS A.2.1 Maintenance and Cleaning................167 A.2.2 Cleaning Tools ....................168 CERTIFICATIONS ....................169 B.1 R HS C ....................
Page 13 AFL M Series LCD Monitor List of Figures Figure 1-1: AFL-12M Front View ..................6 Figure 1-2: AFL-15M Front View ..................6 Figure 1-3: AFL-12M Rear View ...................7 Figure 2-1: AFL-12M Front View ................12 Figure 2-2: AFL-15M Front View ................13 Figure 2-3: AFL-12M Bottom Panel View ..............15 Figure 2-4: AFL-15M Bottom Panel View ..............15...
Page 14 AFL M Series LCD Monitor Figure 4-14: Touch Panel Connector Location ............60 Figure 4-15: Jumpers ....................61 Figure 4-16: AV-9962 Jumper Locations ..............61 Figure 4-17: AV-9962 External (Rear Panel) Connectors ........63 Figure 4-18: Component Video Connector Pinout Locations ........64 Figure 4-19: S-Video Connector Pinout Locations ..........67 Figure 4-20: USB Touch Panel Connector..............68...
Page 15 AFL M Series LCD Monitor Figure 5-3: DVI Connector..................106 Figure 5-4: Optional RS-232 Touch Panel Connector .......... 106 Figure 5-5: USB Touch Panel Connector............... 107 Figure 5-6: AFL-07M Panel Opening ..............109 Figure 5-7: AFL-08MH Panel Opening..............109 Figure 5-8: AFL-12M Panel Opening ..............109 Figure 5-9: Insert the Monitor .................
Page 16 AFL M Series LCD Monitor Figure 7-7: Installation Starts.................. 144 Figure 7-8: Finish Installation ................. 145 Figure 7-9: Control Panel ..................146 Figure 7-10: Remove Touch Screen Driver ............146 Figure 7-11: Driver CD Pop Up Screen..............148 Figure 7-12: Install Shield Wizard Preparation............149 Figure 7-13: Welcome Screen .................
Page 17 AFL M Series LCD Monitor List of Tables Table 1-1: AFL Series Model Variants .................5 Table 1-2: AFL M Series Specifications ..............8 Table 2-1: General Physical Dimensions ..............16 Table 2-2: AFL Series Mounting Kits.................24 Table 2-3: Panel Mounting Clamps................25 Table 2-4: Rack Mounting Holes................25 Table 3-1: AFL-07M LCD Specifications ..............30...
Page 18 AFL M Series LCD Monitor Table 4-10: IR Sensor Connector Pinouts ..............55 Table 4-11: LVDS Signal Output Connector Pinouts..........56 Table 4-12: Power Output Connector Pinouts (CN15)..........57 Table 4-13: Remote Control Connector Pinouts ............57 Table 4-14: TTL Signal Output Connector Pinouts..........59 Table 4-15: Touch Panel Connector Pinouts............60...
Page 19 AFL M Series LCD Monitor Table 4-42: LCD Panel Voltage Select Jumper Settings .........87 Table 4-43: Audio Jack Pinouts .................89 Table 4-44: Component Video Connector Pinouts ..........89 Table 4-45: Composite Signal Input BNC Connector (J10) Pinouts ......90 Table 4-46: Composite Signal Input Connector (J9) Pinouts .........90 Table 4-47: DVI-D Connector Pinouts ...............91...
Page 20 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page xx...
Page 21: Introduction
AFL M Series LCD Monitor Chapter Introduction Page 1...
Page 22 AFL M Series LCD Monitor Page 2...
Page 23: Afl M Series Lcd Monitor Overview
AFL M Series LCD Monitor 1.1 AFL M Series LCD Monitor Overview The AFL series industrial monitor is the latest member of IEI’s line of sophisticated LCD designs, and it has been improved to be RoHS compliant. The AFL series is designed to fit industrial automation, or any other applications that require minimum installation space and flexible configuration.
Page 24: Iei Smartosd
AFL M Series LCD Monitor DVI-D (AFL-15M/17M/19M models only) Support wall/panel/rack/stand/arm mounting Silver color IP 64 compliant front panel RoHS compliant Integrated auto-dimming control sensor (AFL-15M/17M/19M models only) Optional resistive type RS-232/USB touch panel 1.1.3 IEI smartOSD IEI smartOSD is a proprietary On-Screen-Display (OSD) software solution from IEI that enables easy monitor setting adjustments in a Windows environment.
Page 25: External Overview
AFL M Series LCD Monitor 10.4” 800 x 600 400cd/m AFL-10M 10.4” 800 x 600 400cd/m Yes (USB or RS-232) AFL-10M/T-R 12.1” 1024 x 768 450cd/m AFL-12M 12.1” 1024 x 768 450cd/m Yes (USB or RS-232) AFL-12M/T-R 15” 1024 x 768...
Page 26: Rear View
AFL M Series LCD Monitor Figure 1-1: AFL-12M Front View Figure 1-2: AFL-15M Front View 1.2.2 Rear View The rear panel features fan ventilation holes and four retention screw holes that support a wall-mounting bracket. The AFL-12M retention screw holes are shown in Figure 1-3.
Page 27: Series Specifications
AFL M Series LCD Monitor Figure 1-3: AFL-12M Rear View 1.3 Series Specifications Table 1-2 shows the AFL Series specifications. Model AFL-07M AFL-08MH AFL-10M AFL-12M AFL-15M AFL-17M AFL-19M LCD Size 7” 8.4" 10.4" 12.1" 15" 17" 19" Composite Composite Composite...
Page 28: Certifications
1.33kg 2.12kg 3.2kg 5.0kg 5.6kg Table 1-2: AFL M Series Specifications 1.4 Certifications All AFL series industrial monitor models comply with the following international standards: RoHS IP 64 For a more detailed description of these standards, please refer to Sections B.1 and B.2.
Page 29 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 9...
Page 30: Mechanical Overview
AFL M Series LCD Monitor Chapter Mechanical Overview Page 10...
Page 31 AFL M Series LCD Monitor Page 11...
Page 32: Introduction
AFL M Series LCD Monitor 2.1 Introduction This chapter describes the general mechanical overview of the AFL series monitors including front and rear panel, available interfaces and overall dimensions. 2.2 Front View The front of the AFL series industrial monitor is a flat panel TFT LCD screen surrounded by an ABS/PC plastic frame.
Page 33: Figure 2-2: Afl-15M Front View
AFL M Series LCD Monitor A control button panel (OSD) with the following control buttons is located horizontally on the bottom of the front frame of AFL-15M/17M/19M monitors: LCD On/Off Auto Left Down Right Menu The AFL-15M/17M/19M monitors also provide auto-dimming function and include:...
Page 34: Bottom Panel
AFL M Series LCD Monitor 2.3 Bottom Panel All peripheral device connectors are located on the bottom panel of the AFL series industrial monitor. The following sections describe the bottom panel variants and their associated connectors. 2.3.1 AFL-07M/08MH/10M/12M Connectors The following is a list of the bottom panel peripheral device connectors used on the AFL-07M/08MH/10M/12M series industrial monitor.
Page 35: Physical Dimensions
AFL M Series LCD Monitor Figure 2-3: AFL-12M Bottom Panel View Figure 2-4: AFL-15M Bottom Panel View 2.4 Physical Dimensions The following sections describe the physical dimensions for the AFL series industrial monitor. 2.4.1 General Physical Dimensions General physical dimensions for the AFL series monitors are shown in Table 2-1.
Page 36: Table 2-1: General Physical Dimensions
AFL M Series LCD Monitor Width Height Depth Model (mm) (mm) (mm) AFL-07M 226.00 140.00 40.18 AFL-08MH 233.86 183.86 41.09 AFL-10M 276.00 227.00 50.70 AFL-12M 304.00 246.00 49.50 AFL-15M 393.04 308.06 61.00 AFL-17M 428.00 350.00 65.00 AFL-19M 469.94 382.46 66.85...
Page 37: Afl-07M Physical Dimensions
AFL M Series LCD Monitor 2.4.2 AFL-07M Physical Dimensions The physical dimensions of the AFL-07M are shown in Figure 2-5. Figure 2-5: AFL-07M Physical Dimensions (millimeters) Page 17...
Page 38: Afl-08Mh Physical Dimensions
AFL M Series LCD Monitor 2.4.3 AFL-08MH Physical Dimensions The physical dimensions of the AFL-08MH are shown in Figure 2-6. Figure 2-6: AFL-08MH Physical Dimensions (millimeters) Page 18...
Page 39: Afl-10M Physical Dimensions
AFL M Series LCD Monitor 2.4.4 AFL-10M Physical Dimensions The physical dimensions of the AFL-10M are shown in Figure 2-7. Figure 2-7: AFL-10M Physical Dimensions (millimeters) Page 19...
Page 40: Afl-12M Physical Dimensions
AFL M Series LCD Monitor 2.4.5 AFL-12M Physical Dimensions The physical dimensions of the AFL-12M are shown in Figure 2-8. Figure 2-8: AFL-12M Physical Dimensions (millimeters) Page 20...
Page 41: Afl-15M Physical Dimensions
AFL M Series LCD Monitor 2.4.6 AFL-15M Physical Dimensions The physical dimensions of the AFL-15M are shown in Figure 2-9. Figure 2-9: AFL-15M Physical Dimensions (millimeters) Page 21...
Page 42: Afl-17M Physical Dimensions
AFL M Series LCD Monitor 2.4.7 AFL-17M Physical Dimensions The physical dimensions of the AFL-17M are shown in Figure 2-10. Figure 2-10: AFL-17M Physical Dimensions (millimeters) Page 22...
Page 43: Afl-19M Physical Dimensions
AFL M Series LCD Monitor 2.4.8 AFL-19M Physical Dimensions The physical dimensions of the AFL-19M are shown in Figure 2-11. Figure 2-11: AFL-19M Physical Dimensions (millimeters) Page 23...
Page 44: Mounting Kits
AFL M Series LCD Monitor 2.5 Mounting Kits The following sections describe the various optional mounting kits available for each model of the AFL series industrial monitor. Refer to Section 5.5 for detailed instructions on the different mounting methods for the monitors.
Page 45: Rack And Cabinet Mounting
AFL M Series LCD Monitor AFL-08MH AFL-10M AFL-12M Table 2-3: Panel Mounting Clamps 2.6.2 Rack and Cabinet Mounting AFL-07M, AFL-08MH, AFL-10M and AFL-12M models of the AFL series industrial monitor have a series of holes located on the rear of the top and bottom panel for securing the monitor to the rack mounting kit.
Page 46: Monitor Arm Or Stand Mounting
AFL M Series LCD Monitor Figure 2-12: Typical Wall Mounting 2.6.4 Monitor Arm or Stand Mounting The AFL series industrial monitor has four mounting holes which are compatible with VESA FDMI (MIS-D 75 and/or MIS-D 100) and located on the rear panel for mounting the monitor to a monitor arm or stand.
Page 47: Lcd And Touch Panel Specifications
AFL M Series LCD Monitor Chapter LCD and Touch Panel Specifications Page 27...
Page 48 AFL M Series LCD Monitor Page 28...
Page 49: Lcd Specifications
AFL M Series LCD Monitor 3.1 LCD Specifications 3.1.1 LCD Overview The AFL series industrial monitors use the following LCD panels. Data Image FG0700A1DSCWBGL1 7” WVGA TFT LCD AFL-07M: AUO G084SN05 8.4” SVGA TFT LCD AFL-08MH: TOSHIBA LTA104D182F 10.4" SVGA TFT LCD AFL-10M: CMO G121X1-L01 12.1”...
Page 50: Afl-08Mh Lcd Specifications
AFL M Series LCD Monitor 1 CCFL Backlight 50,000 Lamp Life (hrs) 0 ℃ ~+50 ℃ Operating Temperature 8%~95%RH Operating Humidity -20 ℃ ~+60 ℃ Storage Temperature 5%~90%RH Storage Humidity Shock (Non-Operating) 100G, 6ms, Half-sine wave Vibration (Non-Operating) 2.9G, 33.3~400Hz, Sine wave 15mins/axis, 3 direction Table 3-1: AFL-07M LCD Specifications 3.1.3 AFL-08MH LCD Specifications...
Page 51: Afl-10M Lcd Specifications
AFL M Series LCD Monitor 8%~95%RH Operating Humidity -20 ℃ ~+60 ℃ Storage Temperature 5%~95%RH Storage Humidity 50G, 20ms, Half-sine wave Shock (Non-Operating) Vibration (Non-Operating) 1.5G, 10~200~10Hz, Sine wave 30mins/axis, 3 direction Table 3-2: AFL-08MH LCD Specifications 3.1.4 AFL-10M LCD Specifications Table 3-3 lists the LCD specifications of the AFL-10M.
Page 52: Afl-12M Lcd Specifications
AFL M Series LCD Monitor 3.1.5 AFL-12M LCD Specifications Table 3-4 lists the LCD specifications of the AFL-12M. Model AFL-12M Size 12.1” MFR/Model CMO/G121X1-L01 Resolution XGA (1024 x 768) Active Area (mm) 245.76 x 184.32 Pixel Pitch (mm) 0.240 Number of Colors...
Page 53: Afl-17M Lcd Specifications
AFL M Series LCD Monitor Model AFL-15M Size 15" MFR/Model AUO/G150XG01 Resolution XGA (1024 x 768) Active Area (mm) 304.1 x 228.1 Pixel Pitch (mm) 0.297 Number of Colors 262K View Angle (H/V) 120/100 Brightness (cd/m2) Contrast Ratio 400:1 Response Time (ms) (at 25C)
Page 54: Table 3-6: Afl-17M Lcd Specifications
AFL M Series LCD Monitor SXGA (1280 x 1024) Resolution 337.9 x 270.3 Active Area (mm) 0.264 Pixel Pitch (mm) 16.7M Number of Colors 160/160 View Angle (H/V) Brightness (cd/m2) 800:1 Contrast Ratio 5 (Tr+Tf) Response Time (ms) (at 25C) 25.8...
Page 55: Afl-19M Lcd Specifications
AFL M Series LCD Monitor 3.1.8 AFL-19M LCD Specifications Table 3-7 lists the LCD specifications of the AFL-19M. Model AFL-19M 19” Size AUO/M190EG02 MFR/Model SXGA (1280 x 1024) Resolution 376.32 x 301.06 Active Area (mm) 0.294 Pixel Pitch (mm) 16.7M...
Page 56: Optional Touch Panels
AFL M Series LCD Monitor 3.2 Optional Touch Panels IEI offers optional touch panels for the AFL series industrial monitors with the following features: Small border customized design All size touch panel design Customized activation force and palm rejection Customized optical characteristics High reliability and durability in the field 3.2.1 Touch Panel Models...
Page 57: Touch Panel Dimensions
AFL M Series LCD Monitor 3.2.2 Touch Panel Dimensions Table 3-9 shows the touch panel dimensions in millimeters. Model: Dimension Width Length Thick Dimensional Outline: 404.6 PanJit Viewing Area: 306.05 381.3 1190503A Active Area: 301.05 376.3 Key Area: 300.05 375.3 Dimensional Outline: 295.08...
Page 58: Touch Panel Specifications
AFL M Series LCD Monitor 3.2.3 Touch Panel Specifications Table 3-10 lists the touch panel specifications. Type Analog Resistive Type Touch Panel Input Method Finger, Stylus or gloved hand Wire Type 5-wire/4-wire Maximum Voltage and Currant DC7V Position Accuracy Less than 1.5% Isolation ≥20M ohm...
Page 59: Touch Panel Rs-232 Controller Specifications
AFL M Series LCD Monitor 3.2.4 Touch Panel RS-232 Controller Specifications Table 3-11 lists the touch panel RS-232 controller specifications. Circuit Board Dimension 20mm x 75mm (0.79inches x 2.95inches)----(5-Wire) Power Requirements D.C.+5V (100mA typical, 50mV peak to peak maximum ripple and noise) Operating Temperature 0°C to 50°C...
Page 60: Touch Panel Usb Controller Specifications
AFL M Series LCD Monitor 3.2.5 Touch Panel USB Controller Specifications Table 3-12 lists the touch panel USB controller specifications. Circuit Board Dimension 20mm x 75mm (0.79inches x 2.95inches)----(5-Wire) Power Requirements D.C.+5V (100mA typical, 50mV peak to peak maximum ripple and noise) Operating Temperature 0°C to 50°C...
Page 61: Power Adapters
AFL M Series LCD Monitor 3.3 Power Adapters Table 3-13 lists the AC/DC power adapter specifications. Model AFL-07M, AFL-08MH, AFL-10M, AFL-15M, AFL-17M, AFL-19M AFL-12M Power 36 Watt AC/DC Adapter 60 Watt AC/DC Adapter Output Voltage Input Voltage Range 90-264VAC 90-264VAC...
Page 62: Ad Board
AFL M Series LCD Monitor Chapter AD Board Page 42...
Page 63 AFL M Series LCD Monitor Page 43...
Page 64: Av-9962 Ad Board Overview
AFL M Series LCD Monitor 4.1 AV-9962 AD Board Overview The AFL-07M, AFL-08MH, AFL-10M and AFL-12M industrial monitors are preinstalled with AV-9962 AD board to provide a wide variety of control interfaces. The following sections describe the AV-9962 AD board in detail.
Page 65: Av-9962 Ad Board Connectors
AFL M Series LCD Monitor 4.1.1 AV-9962 AD Board Connectors The AV-9962 AD board has the following connectors on-board: 1 x Audio output connector 1 x Auto-dimming connector 1 x Debug port 1 x LED indicator and remote sensor connector...
Page 66: Av-9962 Ad Board Layout
AFL M Series LCD Monitor 4.1.2 AV-9962 AD Board Layout Figure 4-2 shows the on-board peripheral connectors and on-board jumpers. Figure 4-2: AV-9962 Connector and Jumper Locations 4.1.3 AV-9962 Peripheral Interface Connectors Table 4-1 shows a list of the peripheral interface connectors on the AV-9962 AD board.
Page 67: Av-9962 Rear Panel Connectors
AFL M Series LCD Monitor LVDS signal output connector 30-pin connector (AFL-08MH/10M/12M only) OSD and LED connector 16-pin wafer connector Power output connector 2-pin wafer connector CN15 Remote control connector 3-pin wafer connector TTL signal output connector (AFL-07M only) 40-pin connector...
Page 68: Av-9962 On-Board Jumpers
AFL M Series LCD Monitor 4.1.5 AV-9962 On-board Jumpers Table 4-3 lists the on-board jumpers. A detailed description of these jumpers can be found in Section 4.3. Jumper Type Label LCD Panel Voltage Select 6-pin header Touch screen select 2-pin header Table 4-3: AV-9962 On-board Jumpers 4.2 AV-9962 Internal Peripheral Connectors...
Page 69: Auto-Dimming Connector
AFL M Series LCD Monitor Figure 4-3: Audio Output Connector Location 4.2.2 Auto-Dimming Connector CN Label: CN Type: 6-pin wafer connector CN Pinouts: See Table 4-5 CN Location: See Figure 4-4 The auto-dimming connector connects to an external auto-dimming sensor.
Page 70: Debug Port Connector
AFL M Series LCD Monitor Figure 4-4: Auto-dimming Connector Location 4.2.3 Debug Port Connector CN Label: CN12 CN Type: 3-pin wafer connector CN Pinouts: See Table 4-6 CN Location: See Figure 4-5 Use the debug port connector to update the AD board BIOS.
Page 71: Osd And Led Connector
AFL M Series LCD Monitor Figure 4-5: Debug Port Connector Location 4.2.4 OSD and LED Connector CN Label: CN Type: 16-pin wafer connector CN Pinouts: See Table 4-7 CN Location: See Figure 4-6 The OSD and LED connector connects to an external OSD controller.
Page 72: Led Indicator And Remote Sensor Connector
AFL M Series LCD Monitor AUTO/EXIT LED_RED LED_GREEN Table 4-7: OSD and LED Connector Pinouts Figure 4-6: OSD and LED Connector Location 4.2.5 LED Indicator and Remote Sensor Connector CN Label: CN16 CN Type: 6-pin header CN Pinouts: See Table 4-8...
Page 73: Backlight Inverter Interface Connector
AFL M Series LCD Monitor DESCRIPTION IR VCC IR OUT GREEN Table 4-8: LED and Remote Sensor Connector Pinouts Figure 4-7: LED and Remote Sensor Connector Location 4.2.6 Backlight Inverter Interface Connector CN Label: CN Type: 6-pin wafer connector CN Pinouts:...
Page 74: Ir Sensor Connector
AFL M Series LCD Monitor DESCRIPTION +12V +12V BKLT_EN BKLT_ADJ Table 4-9: Backlight Inverter Connector Pinouts Figure 4-8: Backlight Inverter Connector Location 4.2.7 IR Sensor Connector CN Label: CN10 CN Type: 4-pin wafer connector CN Pinouts: See Table 4-10 CN Location: See Figure 4-9 The IR sensor connector connects to the body IR sensor.
Page 75: Lvds Signal Output Connector (Afl-08Mh/10M/12M Only)
AFL M Series LCD Monitor Table 4-10: IR Sensor Connector Pinouts Figure 4-9: IR Sensor Connector Location 4.2.8 LVDS Signal Output Connector (AFL-08MH/10M/12M only) CN Label: CN Type: 30-pin connector CN Pinouts: See Table 4-11 CN Location: See Figure 4-10 Use the LVDS signal output connector to connect the LCD panel to a system.
Page 76: Power Output Connector
AFL M Series LCD Monitor TXE2+ TXE2- TXE1+ TXE1- TXE0+ TXE0- Table 4-11: LVDS Signal Output Connector Pinouts Figure 4-10: LVDS Signal Output Connector Location NOTE: The supply voltage (3.3V (Default), 5V or 12V) can be selected via JP5. 4.2.9 Power Output Connector...
Page 77: Remote Control Connector
AFL M Series LCD Monitor DESCRIPTION Table 4-12: Power Output Connector Pinouts (CN15) Figure 4-11: Power Output Connector Locations 4.2.10 Remote Control Connector CN Label: CN Type: 3-pin wafer connector CN Pinouts: See Table 4-13 CN Location: See Figure 4-12 The remote control connector supports remote control function.
Page 78: Ttl Signal Output Connector (Afl-07M Model Only)
AFL M Series LCD Monitor Figure 4-12: Remote Control Connector Location 4.2.11 TTL Signal Output Connector (AFL-07M Model Only) CN Label: CN Type: 40-pin connector CN Pinouts: See Table 4-14 CN Location: See Figure 4-13 Use the TTL signal output connector to connect the TTL LCD panel to a system.
Page 79: Touch Panel Connector
AFL M Series LCD Monitor TTLB1 TTLB2 TTLB3 TTLB4 TTLB5 TTLDEN TTLHS TTLVS Table 4-14: TTL Signal Output Connector Pinouts Figure 4-13: TTL Signal Output Connector Location 4.2.12 Touch Panel Connector CN Label: CN Type: 9-pin wafer connector CN Pinouts:...
Page 80: Figure 4-14: Touch Panel Connector Location
AFL M Series LCD Monitor DESCRIPTION SENSE Table 4-15: Touch Panel Connector Pinouts Figure 4-14: Touch Panel Connector Location Page 60...
Page 81: Av-9962 On-Board Jumpers
AFL M Series LCD Monitor 4.3 AV-9962 On-board Jumpers NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Page 82: Lcd Panel Voltage Select Jumper
AFL M Series LCD Monitor 4.3.1 LCD Panel Voltage Select Jumper Jumper Label: Jumper Type: 6-pin header Jumper Location: See Figure 4-16 Jumper Settings: See Table 4-16 The JP5 jumper sets the voltage to the LCD panel. Description Panel Voltage select 3.3V (Default)
Page 83: Av-9962 External (Rear Panel) Connectors
AFL M Series LCD Monitor 4.4 AV-9962 External (Rear Panel) Connectors Figure 4-17 shows the AV-9962 external (rear panel) connectors. The peripheral connectors on the back panel of the monitor can connect to external devices. The peripheral connectors on the rear panel are:...
Page 84: Component Video Connector
AFL M Series LCD Monitor AGND Audio_Iutput_Right Table 4-18: Audio Jack Pinouts 4.4.2 Component Video Connector CN Label: CN Type: mini-DIN 7 component video connector CN Pinouts: See Table 4-19 CN Location: See Figure 4-17 and Figure 4-18 Use the mini-DIN 7 component video connector to connect to the system graphics interface.
Page 85: Composite Video Connector
AFL M Series LCD Monitor 4.4.3 Composite Video Connector CN Label: J6, J7 CN Type: Composite video connector CN Pinouts: See Table 4-20 and Table 4-21 CN Location: See Figure 4-17 Use the composite video connector to connect to the system graphics interface.
Page 86: Touch Panel Connector
AFL M Series LCD Monitor DESCRIPTION +12V Table 4-22: DC 12V Connector Pinouts 4.4.5 RS-232 Touch Panel Connector CN Label: CN Type: DB-9 female connector CN Pinouts: See Table 4-23 CN Location: See Figure 4-17 Use the rear panel standard RS-232 DB-9 female touch panel connector to connect the monitor to the system graphics interface.
Page 87: Usb Touch Panel Connector
AFL M Series LCD Monitor Use the mini-DIN 4 S-Video connector to connect to the system graphics interface. DESCRIPTION VGND VGND Y-IN C-IN Table 4-24: S-Video Connector Pinouts Figure 4-19: S-Video Connector Pinout Locations 4.4.7 USB Touch Panel Connector CN Label:...
Page 88: Vga Connector
AFL M Series LCD Monitor DESCRIPTION VSB_VCC USB- USB+ Table 4-25: USB Touch Panel Connector Pinouts Figure 4-20: USB Touch Panel Connector 4.4.8 VGA Connector CN Label: CN Type: D-sub 15 female connector CN Pinouts: See Table 4-26 CN Location: See Figure 4-17 and Figure 4-21 Use the standard D-sub 15-pin VGA connector to connect the monitor to a system.
Page 89: Av-6962 Ad Board Overview
AFL M Series LCD Monitor Figure 4-21: VGA Connector Pinout Locations 4.5 AV-6962 AD Board Overview The AFL-15M, AFL-17M and AFL-19M industrial monitors are preinstalled with AV-6962 AD board to provide a wide variety of control interfaces. The following sections describe the AV-6962 AD board in detail.
Page 90: Figure 4-22: Av-6962 Ad Board Overview
AFL M Series LCD Monitor Figure 4-22: AV-6962 AD Board Overview Page 70...
Page 91: Av-6962 Ad Board Connectors
AFL M Series LCD Monitor 4.5.1 AV-6962 AD Board Connectors The AV-6962 AD board has the following connectors on-board: 1 x Audio output connector 1 x Auto-dimming connector 1 x Debug port 1 x Inverter interface connector 1 x IR sensor connector...
Page 92: Av-6962 Ad Board Layout
AFL M Series LCD Monitor 4.5.2 AV-6962 AD Board Layout Figure 4-23 shows the on-board peripheral connectors and on-board jumpers. Figure 4-23: AV-6962 Connector and Jumper Locations Page 72...
Page 93: Av-6962 Peripheral Interface Connectors
AFL M Series LCD Monitor 4.5.3 AV-6962 Peripheral Interface Connectors Table 4-27 shows a list of the peripheral interface connectors on the AV-6962 AD board. Detailed descriptions of these connectors can be found in Section 4.6. Connector Type Label Audio output connector...
Page 94: Av-6962 On-Board Jumpers
AFL M Series LCD Monitor connector Composite signal input BNC jack Composite BNC connector J9, J10 Digital input connector DVI-D connector Power input connector DC 12V Jack RS-232 connector DB-9 female connector S-Video signal input jack mini-DIN 4 S-Video connector...
Page 95: Av-6962 Internal Peripheral Connectors
AFL M Series LCD Monitor 4.6 AV-6962 Internal Peripheral Connectors Internal peripheral connectors on the AV-6962 AD board are only accessible when the board is outside of the monitor. This section has complete descriptions of all the internal, peripheral connectors on the AV-6962 AD board.
Page 96: Auto-Dimming Connector
AFL M Series LCD Monitor 4.6.2 Auto-Dimming Connector CN Label: CN Type: 6-pin wafer connector CN Pinouts: See Table 4-31 CN Location: See Figure 4-25 The auto-dimming connector connects to an external auto-dimming sensor. DESCRIPTION +3.3V Table 4-31: Auto-dimming Connector Pinouts Figure 4-25: Auto-dimming Connector Location 4.6.3 Debug Port Connector...
Page 97: Backlight Inverter Interface Connector
AFL M Series LCD Monitor CN Pinouts: See Table 4-32 CN Location: See Figure 4-26 Use the debug port connector to update the AD board BIOS. DESCRIPTION Table 4-32: Debug Port Connector Pinouts Figure 4-26: Debug Port Connector Location 4.6.4 Backlight Inverter Interface Connector...
Page 98: Ir Sensor Connector
AFL M Series LCD Monitor input and variable DC voltage to minimize flickering (due to the interference between panel timing and inverter’s AC timing), and adjust LCD back light brightness. DESCRIPTION +12V +12V BKLT_EN BKLT_ADJ Table 4-33: Backlight Inverter Connector Pinouts Figure 4-27: Backlight Inverter Connector Location 4.6.5 IR Sensor Connector...
Page 99: Lvds Signal Output Connector
AFL M Series LCD Monitor IRDET Table 4-34: IR Sensor Connector Pinouts Figure 4-28: IR Sensor Connector Location 4.6.6 LVDS Signal Output Connector CN Label: CN Type: 30-pin connector CN Pinouts: See Table 4-35 CN Location: See Figure 4-29 Use the LVDS signal output connector to connect the LCD panel to a system.
Page 100: Osd And Led Connector
AFL M Series LCD Monitor TXE3+ TXE3- TXEC+ TXEC- TXE2+ TXE2- TXE1+ TXE1- TXE0+ TXE0- Table 4-35: LVDS Signal Output Connector Pinouts Figure 4-29: LVDS Signal Output Connector Location NOTE: The supply voltage (3.3V (Default), 5V or 12V) can be selected via JP5.
Page 101: Figure 4-30: Osd And Led Connector Location
AFL M Series LCD Monitor CN Location: See Figure 4-30 The OSD and LED connector connects to an external OSD controller. DESCRIPTION MENU/ENTER DOWN LEFT RIGHT LED_SENSOR SWAP SOURCE LCD ON/OFF VIN1 VIN2 AUTO/EXIT LED_RED LED_GREEN Table 4-36: OSD and LED Connector Pinouts...
Page 102: Power Input Connector
AFL M Series LCD Monitor 4.6.8 Power Input Connector CN Label: CN14 CN Type: 2-pin wafer connector CN Pinouts: See Table 4-37 CN Location: See Figure 4-31 The AV-6962 supports one 12V power input connector. DESCRIPTION +12V Input Table 4-37: Power Output Connector Pinouts (CN15) Figure 4-31: Power Output Connector Locations 4.6.9 Power Output Connector...
Page 103: Remote Control Connector
AFL M Series LCD Monitor DESCRIPTION Table 4-38: Power Input Connector Pinouts (CN15) Figure 4-32: Power Input Connector Locations 4.6.10 Remote Control Connector CN Label: CN Type: 3-pin box header CN Pinouts: See Table 4-39 CN Location: See Figure 4-33 The remote control connector supports the remote control function.
Page 104: Serial Port Connector
AFL M Series LCD Monitor Figure 4-33: Remote Control Connector Location 4.6.11 RS-232 Serial Port Connector CN Label: COM1 CN Type: 10-pin box header CN Pinouts: See Table 4-40 CN Location: See Figure 4-34 The 10-pin serial port connector provides a second RS-232 serial communications channel.
Page 105: Usb Connector
AFL M Series LCD Monitor Figure 4-34: RS-232 Serial Port Connector Location 4.6.12 USB Connector CN Label: USB1 CN Type: 4-pin header CN Pinouts: See Table 4-41 CN Location: See Figure 4-35 The 1x4 USB pin connectors each provide connectivity to one USB port. Additional external USB ports are found on the rear panel.
Page 106: Av-6962 On-Board Jumpers
AFL M Series LCD Monitor Figure 4-35: USB Connector Location 4.7 AV-6962 On-board Jumpers NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Page 107: Lcd Panel Voltage Select Jumper
AFL M Series LCD Monitor Figure 4-37: Jumper Locations 4.7.1 LCD Panel Voltage Select Jumper Jumper Label: Jumper Type: 6-pin header Jumper Location: See Figure 4-37 Jumper Settings: See Table 4-42 The JP5 jumper sets the voltage to the LCD panel.
Page 108: Av-6962 External (Rear Panel) Connectors
AFL M Series LCD Monitor 4.8 AV-6962 External (Rear Panel) Connectors Figure 4-38 shows the AV-6962 external (rear panel) connectors. The peripheral connectors on the back panel of the monitor can connect to external devices. The peripheral connectors on the rear panel are:...
Page 109: Component Video Connector
AFL M Series LCD Monitor DESCRIPTION AGND Audio_Iutput_Left AGND AGND Audio_Iutput_Right Table 4-43: Audio Jack Pinouts 4.8.2 Component Video Connector CN Label: CN Type: mini-DIN 7 component video connector CN Pinouts: See Table 4-44 CN Location: See Figure 4-38 and Figure 4-39 Use the mini-DIN 7 component video connector to connect to the system graphics interface.
Page 110: Composite Video Connector
AFL M Series LCD Monitor Figure 4-39: Component Video Connector Pinout Locations 4.8.3 Composite Video Connector CN Label: J9, J10 CN Type: Composite BNC connector CN Pinouts: See Table 4-45 and Table 4-46 CN Location: See Figure 4-38 Use the composite video connector to connect to the system graphics interface.
Page 111: Digital Input Connector
AFL M Series LCD Monitor 4.8.4 Digital Input Connector CN Label: CN Type: DVI-D connector CN Pinouts: See Table 4-47 CN Location: See Figure 4-38 and Figure 4-40 The 24-pin female dual link digital only DVI (Digital Visual Interface) connector is a standard for high-speed, high-resolution digital displays.
Page 112: Dc 12V Connector
AFL M Series LCD Monitor 4.8.5 DC 12V Connector CN Label: CN Type: DC 12V Jack CN Pinouts: See Table 4-48 CN Location: See Figure 4-38 Use the DC 12V connector to power the monitor. DESCRIPTION +12V Table 4-48: DC 12V Connector Pinouts 4.8.6 RS-232 Touch Panel Connector...
Page 113: S-Video Connector
AFL M Series LCD Monitor NDSR Table 4-49: RS-232 Touch Panel Connector Pinouts 4.8.7 S-Video Connector CN Label: CN Type: mini-DIN 4 S-Video connector CN Pinouts: See Table 4-50 CN Location: See Figure 4-38 and Figure 4-41 Use the mini-DIN 4 S-Video connector to connect to the system graphics interface.
Page 114: Vga Connector
AFL M Series LCD Monitor CN Pinouts: See Table 4-51 CN Location: See Figure 4-38 and Figure 4-42 Use the rear panel standard USB touch panel connector to connect the monitor to the system graphics interface. DESCRIPTION USB- USB+ Table 4-51: USB Touch Panel Connector Pinouts Figure 4-42: USB Touch Panel Connector 4.8.9 VGA Connector...
Page 115: Figure 4-43: Vga Connector Pinout Locations
AFL M Series LCD Monitor Blue No Connect No Connect DDC DAT Ground Horizontal Synchronization Ground Vertical Synchronization Ground DDC Clock Ground Table 4-52: VGA Connector Pinouts Figure 4-43: VGA Connector Pinout Locations Page 95...
Page 116 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 96...
Page 117: Installation
AFL M Series LCD Monitor Chapter Installation Page 97...
Page 118 AFL M Series LCD Monitor Page 98...
Page 119: Installation Precautions
AFL M Series LCD Monitor 5.1 Installation Precautions WARNING: Failing to reinstall the covers may result in permanent damage to the system. Please make sure all coverings are properly installed. WARNING: Over-tightening rear cover screws will crack the plastic frame.
Page 120: Unpacking
AFL M Series LCD Monitor monitor. The monitor’s cooling vents must not be obstructed by any objects. Blocking the vents can cause overheating of the monitor. Leave at least 5 cm of clearance around the monitor to prevent overheating. Grounding: The monitor should be properly grounded. The voltage feeds must not be overloaded.
Page 121 AFL M Series LCD Monitor protected during the installation process. Use box cutters, a knife or a sharp pair of scissors to open the seal on the top Step 1: side of the external (second) box. Open the external (second) box.
Page 122: Packing List
AFL M Series LCD Monitor Use box cutters, a knife or a sharp pair of scissors the seal on the top side of the Step 3: internal (first) box. Lift the monitor out of the boxes. Step 4: Remove both polystyrene ends, one from each side.
Page 123: Pre-Installation Preparation
AFL M Series LCD Monitor VGA cable Remote control Screw set (5 x Flat head screws) (5 x Round head screws) Wire strain bands User manual and driver CD Optional for Touch Panel (T-R) Models only Touch screen driver CD (T-R models only)
Page 124: Connectors
AFL M Series LCD Monitor Phillips screws. Soft working mat: When the AFL series industrial monitor is installed, the screen is placed on the working surface. It is therefore important to rest the AFL series industrial monitor on a soft at that cannot damage the LCD screen on the front of the AFL series industrial monitor.
Page 125: Power Connector
AFL M Series LCD Monitor Figure 5-1: VGA Connector 5.4.2 12V Power Connector Use the rear panel +12V DC jack to connect the monitor to a power source. Figure 5-2: 12V Power Connector 5.4.3 DVI-D Connector (AFL-15M/17M/19M Models Only) Use the rear panel standard 24-pin female DVI-D connector to connect the monitor to the system graphics interface.
Page 126: Optional Rs-232 Touch Panel Connector
AFL M Series LCD Monitor Figure 5-3: DVI Connector 5.4.4 Optional RS-232 Touch Panel Connector Use the rear panel standard RS-232 DB-9 female touch panel connector to connect the monitor to the touch panel. DESCRIPTION DESCRIPTION NRLSD NCTS NDSR NDTR...
Page 127: Optional Usb Touch Panel Connector
AFL M Series LCD Monitor 5.4.5 Optional USB Touch Panel Connector Use the rear panel standard USB touch panel connector to connect the monitor to the touch panel. DESCRIPTION USB- USB+ Table 5-3: USB Touch Panel Connector Pinouts Figure 5-5: USB Touch Panel Connector 5.5 Mounting the AFL Series Industrial Monitor...
Page 128: Mounting Kits
AFL M Series LCD Monitor 5.5.1 Mounting Kits Table 5-4 lists the different mounting kits available from IEI. AFL-07M AFL-08MH AFL-10M AFL-12M AFL-15M AFL-17M AFL-19M Panel Mounting Kits AFLPK-08 AFLPK-12 AFLPK-15 AFLPK-17 AFLPK-19 Wall Mounting Kits AFLWK-12 AFLWK-19 Rack Mounting Kits...
Page 129: Figure 5-6: Afl-07M Panel Opening
AFL M Series LCD Monitor Figure 5-6: AFL-07M Panel Opening Figure 5-7: AFL-08MH Panel Opening Figure 5-8: AFL-12M Panel Opening Page 109...
Page 130: Figure 5-9: Insert The Monitor
AFL M Series LCD Monitor Slide the monitor through the hole until the metal frame is flush against the panel Step 3: (Figure 5-9). Figure 5-9: Insert the Monitor Insert the panel mounting clamps into the pre-formed holes along the edges of Step 4: the monitor, behind the metal frame.
Page 131: Wall Mounting
AFL M Series LCD Monitor Figure 5-10: Tighten the Panel Mounting Clamp Screws (AFL-12M) Tighten the screws that pass through the panel mounting clamps until the plastic Step 5: caps at the front of all the screws are firmly secured to the panel (Figure 5-10).
Page 132: Figure 5-11: Wall-Mounting Bracket
AFL M Series LCD Monitor To mount the AFL-07M/08MH/10M/12M monitor onto the wall, please follow the steps below. Select the location on the wall for the wall-mounting bracket. Step 1: Carefully mark the locations of the four brackets screw holes on the wall.
Page 133: Figure 5-12: Chassis Support Screws
AFL M Series LCD Monitor downwards until the monitor rests securely in the slotted holes (Figure 5-12). Ensure that all four of the mounting screws fit snuggly into their respective slotted holes. Figure 5-12: Chassis Support Screws NOTE: In the diagram below the bracket is already installed on the wall.
Page 134: Afl-15M/17M/19M Wall Mounting
AFL M Series LCD Monitor Figure 5-13: Secure the Monitor 5.5.4.1 AFL-15M/17M/19M Wall Mounting To mount the AFL-15M/17M/19M monitor onto the wall, please follow the steps below. Select the location on the wall for the wall-mounting bracket. Step 1: Carefully mark the locations of the four brackets screw holes on the wall.
Page 135: Figure 5-14: Wall-Mounting Bracket
AFL M Series LCD Monitor Figure 5-14: Wall-mounting Bracket Insert the four monitor mounting screws provided in the wall mounting kit into the Step 6: four screw holes on the real panel of the monitor and tighten until the screw shank is secured against the rear panel (Figure 5-15).
Page 136: Monitor Stand Installation
AFL M Series LCD Monitor Figure 5-15: Chassis Support Screws 5.5.5 Monitor Stand Installation The AFL series industrial monitor has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA hole pattern. To mount the AFL series industrial monitor onto a stand, please follow the steps below.
Page 137: Arm Mounting
AFL M Series LCD Monitor Figure 5-16: Monitor Stand Mounting 5.5.6 Arm Mounting The AFL series is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75mm or 100mm interface pad. To mount the AFL series on an arm, please follow the steps below.
Page 138: Figure 5-17: Afl-07M/Afl-08Mh Arm Mounting Retention Screw Holes
AFL M Series LCD Monitor Figure 5-17, the AFL-10M/12M are shown in Figure 5-18 and the AFL-15M/17M/19M are shown in Figure 5-19. Figure 5-17: AFL-07M/AFL-08MH Arm Mounting Retention Screw Holes Figure 5-18: AFL-10M/12M Arm Mounting Retention Screw Holes Page 118...
Page 139: Figure 5-19: Afl-15M/17M/19M Arm Mounting Retention Screw Holes
AFL M Series LCD Monitor Figure 5-19: AFL-15M/17M/19M Arm Mounting Retention Screw Holes Secure the monitor to the interface pad by inserting four retention screws Step 4: through the bottom of the mounting arm interface pad and into the monitor.
Page 140 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 120...
Page 141: On-Screen-Display (Osd) Controls
AFL M Series LCD Monitor Chapter On-Screen-Display (OSD) Controls Page 121...
Page 142 AFL M Series LCD Monitor Page 122...
Page 143: User Mode Osd Structure
AFL M Series LCD Monitor 6.1 User Mode OSD Structure 6.1.1 OSD Buttons There are several on-screen-display (OSD) control buttons oriented either vertically on the right side of the monitor front panel or on the bottom of the monitor front panel. Figure 6-1 shows a typical arrangement of OSD controls.
Page 144: Osd Menu Structure
AFL M Series LCD Monitor Menu/Enter Button Press this button to open the OSD window. When inside a menu, press this button to confirm the function adjustment or selection of the item. There may be several levels in one item. As you select an item in the menu, the sub-items will be displayed.
Page 145: Table 6-1: Osd Menus
AFL M Series LCD Monitor Color Temperature USER Red (0 to 100) Green (0 to 100) Blue (0 to 100) 4200K, 5000K, 6500K, 7500K, 9300K sRGB Off, On System Menu Audio Mute On, Off Volume 0 to 100 Factory Reset...
Page 146: Using The Osd
AFL M Series LCD Monitor 6.2 Using the OSD OSD menu options are described below. 6.2.1 Image Menu Image menu options are shown in Figure 6-2. Figure 6-2: Image Menu Adjusts the brightness of screen. This function adjusts the Brightness offset value of ADC.
Page 147: Display Menu
AFL M Series LCD Monitor 6.2.2 Display Menu Display options are shown in Figure 6-3. Figure 6-3: Display Menu Automatically adjusts the LCD screen position. Auto Adjust Adjusts the input signal (Analog only) Phase Adjusts the dot clock position Clock This item allows adjustment of the following items.
Page 148: Pip Menu
AFL M Series LCD Monitor 6.2.3 PiP Menu The PiP options are shown in Figure 6-4. Figure 6-4: PiP Menu PiP options are described below. Turns the Picture-in-Picture feature on or off Selects the display input PiP Input Select Selects the size of the PiP frame...
Page 149: Color Menu
AFL M Series LCD Monitor 6.2.4 Color Menu Color options are shown in Figure 6-5. Figure 6-5: Color Menu Color options are described below. Automatically adjusts the color hues Auto Adjust Fine-tunes the palette of color hues Color Temperature Fine-tunes the balance among the Red, Green, and Blue...
Page 150: System Menu
AFL M Series LCD Monitor 6.2.5 System Menu System options are shown in Figure 6-6. Figure 6-6: System Menu System options are described below. Mutes the audio or adjusts audio volume. Audio Restores the default OSD settings. Note that this will Factory Reset restore all default display settings.
Page 151: Osd Configuration
AFL M Series LCD Monitor 6.2.5.1 OSD Configuration OSD configurations are shown in Figure 6-7. Figure 6-7: OSD Configuration OSD configuration options are described below. Determines how many seconds the OSD screen stays on OSD Timer screen before it disappears when OSD is left unattended.
Page 152: Auto-Brightness (Auto-Dimming) Configuration
AFL M Series LCD Monitor 6.2.5.2 Auto-Brightness (Auto-Dimming) Configuration The AFL series features an auto-dimming function. Use the OSD to turn this function on or turn off. The auto-dimming screen is shown in Figure 6-8. Refer to Appendix 8.1C for details.
Page 153: Remote Contol
AFL M Series LCD Monitor 6.3 Remote Contol The AFL series comes with a remote control for easy configuration of OSD settings. Figure 6-9 shows the remote control and its function keys. Figure 6-9: Remote Control LCD On/Off. Press this button to turn the LCD monitor on or off.
Page 154: Software Drivers
AFL M Series LCD Monitor Chapter Software Drivers Page 134...
Page 155 AFL M Series LCD Monitor Page 135...
Page 156: Introduction
AFL M Series LCD Monitor 7.1 Introduction The touch panel controller enables analog resistive touch panels for four-wire, five-wire & eight-wire models. The controller directly communicates with the PC system through the touch panel communications interface. The controller design is superior in sensitivity, accuracy, and friendly operation.
Page 157: 7-Inch To 12.1-Inch Touch Panel Driver Installation
AFL M Series LCD Monitor RS-232 Interface: If the touch screen interface connection is an RS-232 connection, connect the RS-232 connector on the sing board computer to the DB-9 connector on the bottom of the Afolux monitor. USB Interface: If the touch screen interface connection is a USB connection, connect the USB connector on the sing board computer to the external USB port connector on the bottom of the Afolux monitor.
Page 158: Figure 7-1: 7-Inch To 12.1" Touch Screen Driver Installation Startup Screen
AFL M Series LCD Monitor Figure 7-1: 7-inch to 12.1” Touch Screen Driver Installation Startup Screen NOTE: The installation procedure is shown using the 12.1 inch Afolux monitor. Select the correct model from the list in Figure 7-1. The screen in Figure 7-2 Step 3: appears.
Page 159: Figure 7-2: Available Drivers
AFL M Series LCD Monitor Figure 7-2: Available Drivers Select the Touch Screen option in Figure 7-2. The directory in Figure 7-3 Step 4: appears. Page 139...
Page 160: Figure 7-3: Setup Icon
AFL M Series LCD Monitor Figure 7-3: Setup Icon Double click the setup icon in Figure 7-3. Step 5: The Welcome screen in Figure 7-4 appears. Step 6: Page 140...
Page 161: Figure 7-4: Welcome Screen
AFL M Series LCD Monitor Figure 7-4: Welcome Screen Click Next to continue. Step 7: The license agreement in Figure 7-5 appears. Accept the terms of the Step 8: agreement and click Next. Page 141...
Page 162: Figure 7-5: License Agreement
AFL M Series LCD Monitor Figure 7-5: License Agreement The installation initiation screen appears. See Figure 7-6. Click Install. Step 9: Page 142...
Page 163: Figure 7-6: Initiate Install
AFL M Series LCD Monitor Figure 7-6: Initiate Install The installation of the program begins. See Figure 7-7. Step 10: Page 143...
Page 164: Figure 7-7: Installation Starts
AFL M Series LCD Monitor Figure 7-7: Installation Starts When the installation is complete, the complete screen appears. See Figure 7-8. Step 11: To complete the installation process click Finish. Step 0: Page 144...
Page 165: Change The Touch Screen Interface
AFL M Series LCD Monitor Figure 7-8: Finish Installation 7.2.3 Change the Touch Screen Interface If the touch screen interface must be changed from an RS-232 interface to a USB interface or, from a USB interface to an RS-232 interface, the following steps must be followed.
Page 166: 7-Inch To 12.1-Inch Touch Panel Driver Configuration
AFL M Series LCD Monitor Figure 7-9: Control Panel Double click the Add/Remove Programs icon in Figure 7-9. Step 2: Find the PenMount DMC6000 driver and select remove. See Figure 7-10. Step 3: The driver is removed. Step 4: Step 0: Figure 7-10: Remove Touch Screen Driver 7.2.4 7-inch to 12.1-inch Touch Panel Driver Configuration...
Page 167: 15-Inch To 19-Inch Driver Installation And Configuration
AFL M Series LCD Monitor 7.3 15-inch to 19-inch Driver Installation and Configuration 7.3.1 RS-232 or USB Touch Screen Before installing the driver, connect the Afolux monitor to the motherboard. The 15-inch to 19-inch Afolux monitors support touch screen modality through either RS-232 or USB interface connection.
Page 168: Figure 7-11: Driver Cd Pop Up Screen
AFL M Series LCD Monitor Figure 7-11: Driver CD Pop Up Screen Select the operating system installed on the system from the menu on the left Step 4: side of the screen. NOTE: The following description is for driver installation using a Windows 2000 OS.
Page 169: Figure 7-12: Install Shield Wizard Preparation
AFL M Series LCD Monitor Figure 7-12: Install Shield Wizard Preparation After the Install Shield Wizard is ready, a welcome screen appears (Figure Step 6: 7-13). Figure 7-13: Welcome Screen To continue the installation process click N Step 7: Page 149...
Page 170: Figure 7-14: Install Ps/2 Interface Driver
AFL M Series LCD Monitor An Install PS/2 interface driver screen appears (Figure 7-14). It is not necessary Step 8: to install the PS/2 interface driver. To continue click N Figure 7-14: Install PS/2 Interface Driver Four point calibration options are then selected. Four point calibrations can be Step 9: done every time a user boots up, during the next time the system boots or never.
Page 171: Figure 7-15: Install Ps/2 Interface Driver
AFL M Series LCD Monitor Figure 7-15: Install PS/2 Interface Driver The user is then prompted to ensure the touch monitor or the RS-232 touch Step 10: controller is plugged into the system (Figure 7-16). Once the touch controller is...
Page 172: Figure 7-17: Controller Installation Directory
AFL M Series LCD Monitor Figure 7-17: Controller Installation Directory The user is then prompted to select a file directory in which the program icons Step 12: are saved (Figure 7-18). The default folder is “TouchKit.” If a different folder must be used, select a folder from the list shown.
Page 173: Figure 7-18: Program Icon Directory
AFL M Series LCD Monitor Figure 7-18: Program Icon Directory The program then starts installing (Figure 7-19). Step 13: Figure 7-19: Installing Page 153...
Page 174: 15-Inch To 19-Inch Touch Panel Driver Configuration
AFL M Series LCD Monitor Once the program is finished installing, the user is prompted to restart the Step 14: computer now or to restart the computer later (Figure 7-20). Select when the computer should be restarted and click “F ”...
Page 175: Figure 7-21: Penmount Monitor Icon
AFL M Series LCD Monitor Make sure the touch screen driver is properly installed. Step 2: Locate the PenMount Monitor icon in the bottom left corner of the screen. Step 3: Figure 7-21: PenMount Monitor Icon Click the icon. A pop up menu appears. See Figure 7-22.
Page 176: Figure 7-23: Configuration Screen
AFL M Series LCD Monitor Figure 7-23: Configuration Screen Select the PenMount5 600R icon in Figure 7-23. Step 7: The calibration initiation screen in Figure 7-24 appears. Step 8: From Figure 7-24, select the Standard_Calibration key in Figure 7-24. Step 9:...
Page 177: Figure 7-24: Calibration Initiation Screen
AFL M Series LCD Monitor Figure 7-24: Calibration Initiation Screen The calibration screen in is shown. See Figure 7-25. Step 10: Figure 7-25: Calibration Screen Follow the instructions. The user is asked touch the screen at five specified Step 11: points after which the screen is calibrated.
Page 178 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 158...
Page 179: Gasket Replacement
AFL M Series LCD Monitor Chapter Gasket Replacement Page 159...
Page 180 AFL M Series LCD Monitor Page 160...
Page 181: Gasket
AFL M Series LCD Monitor 8.1 Gasket Replacement A gasket used for a long time may gradually lose its ability to protect the monitor from fluids and vapors; scratches or dirt may also accumulate. It is recommended that the gasket be replaced yearly.
Page 182 AFL M Series LCD Monitor NOTE: Compliance with the IP 64 standard depends on correct installation of the gasket. Be sure to check that the gasket is properly installed after changing it. Page 162...
Page 183 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 163...
Page 184: Asafety Precautions
AFL M Series LCD Monitor Appendix Safety Precautions Page 164...
Page 185 AFL M Series LCD Monitor Page 165...
Page 186: Safety Precautions
AFL M Series LCD Monitor WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFL series monitor. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions...
Page 187: Anti-Static Precautions
AFL M Series LCD Monitor A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the AFL series monitor may result in permanent damage to the AFL series monitor and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL series monitor.
Page 188: Cleaning Tools
AFL M Series LCD Monitor components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the AFL series monitor does not require cleaning. Keep fluids away from the AFL series monitor interior.
Page 189: Bcertifications
AFL M Series LCD Monitor Appendix Certifications Page 169...
Page 190 AFL M Series LCD Monitor Page 170...
Page 191: Rohs Compliant
AFL M Series LCD Monitor B.1 RoHS Compliant All models in the AFL LCD monitor series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial monitors and the monitor itself are RoHS compliant.
Page 192: Cauto-Dimming
AFL M Series LCD Monitor Appendix Auto-Dimming Page 172...
Page 193 AFL M Series LCD Monitor Page 173...
Page 194: Auto-Dimming Configurations
AFL M Series LCD Monitor C.1 Auto-Dimming Configurations The AFL series industrial monitor features an auto-dimming LCD that can automatically adjust the backlight brightness according to the ambient light. If the auto-dimming function is turned on, the backlight turns brighter when the ambient illuminance is high. The backlight dims automatically when the ambient illuminance level is low.
Page 195: Osd Control
AFL M Series LCD Monitor Figure C-1: Default Linearity of the LCD Backlight and Ambient Light C.1.2 OSD Control The auto-dimming configurations are shown in Section 6.2.5.2. Figure C-2: Auto-Dimming Configurations Menu Page 175...
Page 196 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 176...
Page 197: Dsmartosd
AFL M Series LCD Monitor Appendix smartOSD Page 177...
Page 198 AFL M Series LCD Monitor Page 178...
Page 199: Iei Smartosd Quick Installation Guide
AFL M Series LCD Monitor D.1 IEI smartOSD Quick Installation Guide IEI smartOSD is a proprietary On-Screen-Display (OSD) software solution from IEI that enables easy, remote monitor setting adjustments in a Windows environment. IEI smartOSD delivers excellent performance and provides more flexibility than the typical OSD hardware solutions when adjusting a monitor.
Page 200 AFL M Series LCD Monitor Item Elements EDID EDID contains basic information about the monitor and its capabilities. Image Brightness Contrast Sharpness Display Auto Adjust Phase Clock Color Auto Color Color Temperature Gamma PIP Source Input PIP Size System Monitor Power Control...
Page 201: Edid Page
AFL M Series LCD Monitor D.3.1 EDID Page Page 181...
Page 202: Image Page
AFL M Series LCD Monitor D.3.2 Image Page Page 182...
Page 203: Display Page (For Analog Signal)
AFL M Series LCD Monitor D.3.3 Display Page (for analog signal) Page 183...
Page 204: Color Page
AFL M Series LCD Monitor D.3.4 Color Page Page 184...
Page 205: Pip Page (For Mdm/Aflux Series)
AFL M Series LCD Monitor D.3.5 PIP Page (For MDM/AFLUX series) Page 185...
Page 206: System Page
AFL M Series LCD Monitor D.3.6 System Page Page 186...
Page 207: User Page
AFL M Series LCD Monitor D.3.7 User Page Page 187...
Page 208: About Page
AFL M Series LCD Monitor D.3.8 About Page D.4 Install Software To install the software, please follow the steps below: Follow the instructions from the interactive installer to install the IEI smartOSD Step 1: on the system. Insert the installation disk that came with the system and open the installation Step 2: file.
Page 209 AFL M Series LCD Monitor Error! Click Next to continue. Step 4: The screen below appears. Step 5: Page 189...
Page 210 AFL M Series LCD Monitor Select the installation folder from the screen shown above. Step 6: Click Next to continue. Step 7: The screen shown below appears. Step 8: Page 190...
Page 211 AFL M Series LCD Monitor Confirm the installation by clicking Next in the screen above. Step 9: The program starts to install and the progress bar shown below appears. Step 10: Page 191...
Page 212 AFL M Series LCD Monitor When the installation is complete the screen below appears. Step 11: Click Close in the screen above. Step 12: After quick setup is complete, the IEI smartOSD wizard logo appears on the Step 13: desktop as shown in the screen below.
Page 213 AFL M Series LCD Monitor Page 193...
Page 214: Smartosd Faq
AFL M Series LCD Monitor D.5 smartOSD FAQ For troubleshooting, please see the steps below: 1. Installation fails under Windows 2000 and shows following image: Solution: Download and install service pack Windows Installer 3.1 2. Installation fail under Vista while showing following image: Solution: Install smartOSD.exe as the administrator authority...
Page 215 AFL M Series LCD Monitor 3. The Model Fail error message shown below appears. Solution: smartOSD only supports firmware version 2.0 and following versions. 4. The DDC port fail error message shown below appears. Solutions: Page 195...
Page 216 AFL M Series LCD Monitor i. Check VGA or DVI cable ii. Check an IEI monitor is being used iii. Make sure the version is version 2.3 for the AFOLUX/MDM series and version 1.5 for the DM/TDM/SRM/LCD-KIT series that have the smartOSD functions iv.
Page 217 AFL M Series LCD Monitor THIS PAGE IS INTENTIONALLY LEFT BLANK Page 197...
Page 218: Hazardous Materials Disclosure
AFL M Series LCD Monitor Appendix Hazardous Materials Disclosure Page 198...
Page 219 AFL M Series LCD Monitor Page 199...
Page 220: Hazardous Material Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury
AFL M Series LCD Monitor E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 221 AFL M Series LCD Monitor Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly...
Page 222 AFL M Series LCD Monitor 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体显示印刷电路板金属螺帽电缆组装风扇组装电力供应组装电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。...
Page 223: Findex
AFL M Series LCD Monitor Index Page 203...
Page 224 PICOe-6612 5.25” CPU Card Page 204...
Page 225 PICOe-6612 5.25” CPU Card 12V, 14, 47, 56, 62, 65, 66, 74, 80, 87, 90, 92, Dimension, 8, 37, 39, 40 Dimensions, 15, 16, 37 DVI-D, 7, 104 AD board, 44, 45, 46, 47, 48, 69, 71, 73, 75 AD Board, 8, 44, 45, 46, 69, 70, 71, 72 EPIC anti-static precautions RS-232, 92...
Page 226 PICOe-6612 5.25” CPU Card System Menu, 130 Over-voltage Protection, 41 LCD, 3, 7, 48, 53, 55, 58, 62, 74, 77, 79, 87 LCD Specifications, 29 AFL-07M LCD Specifications, 29 Packing List, 102 AFL-08M LCD Specifications, 30 panel, 111 AFL-10M LCD Specifications, 31 Panel Mounting, 25 AFL-12M LCD Specifications, 32 peripheral interface connectors, 46, 73...
Page 227 PICOe-6612 5.25” CPU Card port, 85 USB 2.0, 85 Safety Precautions, 166 USB 2.0, 85 Saturation, 30 USB connector, internal, 85 serial port connector, 84 location and pinouts, 85 location and pinouts, 84 Short Circuit Protection, 41 speakers, 3, 48, 75 VESA, 111, 116 Specifications, 30, 31, 32, 33, 34, 35, 38, 39, VGA, 7, 68, 69, 94, 95...

IEI Technology AFL M Series User Manual

1 Introduction

2 Mechanical Overview

3 Lcd and Touch Panel Specifications

4 Ad Board

5 Installation

6 On-Screen-Display (Osd) Controls

Quick Links

Need help?

Questions and answers

Related Manuals for IEI Technology AFL M Series

Summary of Contents for IEI Technology AFL M Series