Figure 2-3: Hdd Brackets; Figure 2-4: Secure Hdd To The Brackets - IEI Technology iSignager LCD 26 User Manual

Figure 2-3: HDD Brackets

Step 5: Secure the HDD brackets to the HDD. Align the retention screw holes on the
HDD brackets with the retention screw holes on the sides of the HDD
(Figure 2-4).

Figure 2-4: Secure HDD to the Brackets

Step 6: Install the HDD into the . Insert the HDD to the IDE connector on the board and
secure the HDD to the board with four retention screws (Figure 2-5).
Page 20
iSignager LCD Series