Introduction; Module Ratings; Technical Specifications - Chore-Time Control Installation And User Manual

1.0 Introduction

Chore-Time Control is an electronic device used for environmental and building control in livestock applications. It
allows the user to maintain a specified target temperature by controlling the operation of ventilation and heating
equipment. The Chore-Time Control can be configured with the below I/O cards. Please check the ratings for each
card before installation.

1.1 Module Ratings

2X Relay Card Dry contact, 15A resistive Max Motor Load 1HP @ 120VAC, 2HP @ 240VAC
4X Relay Card Dry contact, 15A resistive Max Motor Load 1HP @ 120VAC, 2HP @ 240VAC
1X Variable Card 10A Max Motor Load @ 240VAC
1X Curtain Card Dry contact, 7.5A resistive Max Motor Load 1/2HP @ 120VAC, 1HP @ 240VAC
2X Curtain Card Dry contact, 7.5A resistive Max Motor Load 1/2HP @ 120VAC, 1HP @ 240VAC
8X Relay Card Dry contact, Max 3A resistive
2X Analog Card Dry contact, 7.5A resistive Max Motor Load 1/2HP @ 120VAC, 1HP @ 240VAC
4X 0-10V + Relays Card Dry contact, 5A resistive Max Motor Load 1/2HP @ 120VAC, 1HP @ 240VAC
4X 0-10V + Amps Card 0-10V up to 20mA
Chain Disk Card 1x Dry Contact, 15A resistive Max Motor Load 1HP @ 120VAC, 2HP @ 240VAC, 1x Dry Contact, 1A
resistive Max Motor Load 0.5HP @ 120VAC, 1HP @ 240VAC
Input Card 0-3.3VDC up to 1.65mA
Power Supply Card: 90-264VAC; 72 Watts peak

1.2 Technical Specifications

Model: Chore-Time Control
Main supply: 120-240 VAC
Frequency: 50/60 Hz
Power Consumption: 65 Watts
Enclosure: ABS Plastic
Operating temperature: 32 to 104 °F (0 to 40 °C)
Storage temperature: 32 to 122 °F (0 to 50 °C)
Indoor use only
Ambient relative humidity: max. 95 %
Power Supply wiring: THHN rated 12 AWG
3