Table of Contents
Advertisement
Available languages
Available languages
Multi Mode
Multi Mode
Multi Mode
Saving User Multis
Saving User Multis
User Multi 저장하기
Saving a Layer
Saving a Layer
Layer 저장하기
After setting the Layer parameters, press the Save button to the left of the display to begin
After setting the Layer parameters, press the Save button to the left of the display to begin
the saving process. See Save User Multis on page 7-8 for details on saving.
the saving process. See Save User Multis on page 7-8 for details on saving.
Once you have saved your Layer, you can continue to add Split or Layer Zones to the Multi
Once you have saved your Layer, you can continue to add Split or Layer Zones to the Multi
until you reach the maximum of four active Zones. Also, once you have saved your Layer,
until you reach the maximum of four active Zones. Also, once you have saved your Layer,
you can edit controller assignments and other Multi parameters in Multi Edit Mode (see
you can edit controller assignments and other Multi parameters in Multi Edit Mode (see
Multi Edit Mode on page 8-1 for details).
Multi Edit Mode on page 8-1 for details).
User Multi 저장하기
Saving User Multis
Saving User Multis
To save changes to the current User Multi, or to save a changed Factory Multi to a User
To save changes to the current User Multi, or to save a changed Factory Multi to a User
Category, press the Save button once.
Category, press the Save button once.
You can save Multis with ID numbers from 257 to 512. When you initially press the Save
You can save Multis with ID numbers from 257 to 512. When you initially press the Save
button, Artis SE always selects the next available unused ID number and displays the current
button, Artis SE always selects the next available unused ID number and displays the current
Multi name.
Multi name.
Before Saving, you can specify the ID number and rename the Multi. After specifying the
Before Saving, you can specify the ID number and rename the Multi. After specifying the
Multi ID number and name, press the Save button again to complete the saving process.
Multi ID number and name, press the Save button again to complete the saving process.
Changing ID Numbers
Changing ID Numbers
ID 번호 변경하기
To change the ID number turn the Alpha Wheel or use the
To change the ID number turn the Alpha Wheel or use the
ID number. You can also use the Bank, Category and Program/Multi buttons to select an
ID number. You can also use the Bank, Category and Program/Multi buttons to select an
Bank and Category button, then press a Program/Multi button to select an ID within that
Bank and Category button, then press a Program/Multi button to select an ID within that
category.
category.
If you choose an ID that is already in use, you will see an asterisk in the display after the ID
If you choose an ID that is already in use, you will see an asterisk in the display after the ID
number. Press Save
number. Press Save
7-8
7-8
72
Layer 파라미터 설정을 마치면 화면 좌측의 Save 버튼을 눌러 음색을 저장합니다.
Layer 음색을 User Multi로 저장한 후에는 Split 또는 Layer Zone을 최대 4
개까지 추가할 수 있습니다. 또한 Multi Edit Mode에서 컨트롤러 설정 및 기타
Multi 파라미터들을 편집할 수 있습니다.
현재의 User Multi를 저장하거나, 내장되어있는 기본 Multi를 수정하여 User
Multi로 저장하려면 Save 버튼을 한 번 누릅니다.
User Multi는 ID 번호 267부터 512 범위 내에 저장할 수 있습니다. Save 버튼을
처음 누른 경우, Artis SE는 저장 가능한 가장 작은 ID 번호를 제시하며 현재
Multi의 이름이 나타납니다.
Multi의 번호와 이름을 변경할 수 있으며, 설정이 끝난 뒤 Save 버튼을 한번 더
누르면 해당 번호로 음색이 저장됩니다.
음색의 번호를 변경하려면 Alpha Wheel, -/+ 버튼을 이용하여 새로운 ID
번호를 선택합니다. Bank, Category, Program/Multi 버튼을 이용하여 선택할
수도 있으며 User Multi를 카테고리로 묶을 때 유용합니다. 이 경우, Bank와
Category를 먼저 선택한 다음 Program/Multi 버튼을 눌러 카테고리 내에서
사용할 번호를 선택합니다.
이미 사용중인 번호를 선택하면 번호 뒤에 별표가 나타나며, Save 버튼을 눌러
해당 번호 위에 덮어쓰거나 다른 번호를 선택할 수 있습니다.
Save Multi Over: 1/2
258*Samba Layers
Save Multi Over: 1/2
258*Samba Layers
–
+
–
+
&
&
buttons to select the new
buttons to select the new
Advertisement
Table of Contents
