Table of Contents
Advertisement
Available languages
Available languages
Load (Overwrite)?
Load (Overwrite)?
Load (Overwrite)?
Load (Overwrite)?
기존에 저장해 두었던 User Program, User Multi 등의 파일을 Artis SE로 불러올
User Programs and User Multis from a device connected to the Artis SE via USB. Selecting
수 있습니다. Load (Overwrite)?를 실행하여 이전에 저장했던 User Program,
Load (Overwrite)?
Load (Overwrite)?
User Programs and User Multis from a device connected to the Artis SE via USB. Selecting
User Multi를 로딩하면 기존에 Artis SE에 저장되어 있던 User Program과
and deletes (overwrites) the existing User Programs and Multis currently in the Artis SE. If
User Multi는 삭제됩니다. 오브젝트의 개수가 현재 User 위치에 저장된 것보다
Load (Overwrite)?
and deletes (overwrites) the existing User Programs and Multis currently in the Artis SE. If
적으면, 남는 위치는 비워집니다.
locations will be emptied.
+
+ 버튼을 눌러 로딩 과정을 시작합니다. 장치가 인식되지 않은 경우 화면에는
locations will be emptied.
Press the
button to begin the process of loading from the selected device (USB or PC).
안내 메시지가 나타납니다.
If the device is not attached or not recognized, the display will prompt you to connect the
+
Press the
button to begin the process of loading from the selected device (USB or PC).
selected device or unplug and reconnect it. Follow the instructions on the display. If PC
Device 옵션에서 PC를 선택한 경우, Artis SE는 컴퓨터에 임시 디스크/드라이브
If the device is not attached or not recognized, the display will prompt you to connect the
was selected for the Device option, then the Artis SE will appear as a removable disk/drive
(removable disk/drive)로 나타납니다. 기존에 저장했던 User Program과 User
selected device or unplug and reconnect it. Follow the instructions on the display. If PC
Multi 파일을 컴퓨터에서 Artis SE 임시 디스크/드라이브로 복사합니다.
was selected for the Device option, then the Artis SE will appear as a removable disk/drive
Multis, from your computer into the Artis SE removable disk/drive. If USB was selected for
Device 옵션에서 USB를 선택한 경우, Param/Channel 버튼을 눌러 Artis SE
the Device option, use the Param/Channel ▲ or ▼
Multis, from your computer into the Artis SE removable disk/drive. If USB was selected for
화면에서 로딩할 파일을 선택합니다.
the Device option, use the Param/Channel ▲ or ▼
Press Assign, and a warning message will appear before executing the Overwrite:
Assign 버튼을 누르면 기존 파일을 덮어쓰기(Overwrite) 전에 경고 메시지가
나타납니다.
Press Assign, and a warning message will appear before executing the Overwrite:
Pressing Assign
Assign 버튼을 한 번 더 눌러 파일을 로딩하거나, Exit 버튼을 눌러 로딩을
Pressing Assign
취소합니다.
option.
파일을 로딩하는 동안 화면에는 "File Loading..."이라는 메시지가, 로딩이
option.
완료되면 "File loaded." 라는 메시지가 나타납니다.
File loaded
로딩하려는 Artis SE 임시 드라이브에 파일이 없거나 또는 로딩 과정에서
File loaded
문제가 발생하면, 화면에는 "Load Error" 라는 에러 메시지가 나타납니다
load operation, then the display will show the error message,
specifying the reason for the error.
load operation, then the display will show the error message,
specifying the reason for the error.
loads the previously saved User Programs and User Multis
loads the previously saved User Programs and User Multis
Copy file to drive
After Press [Assign]
Copy file to drive
After Press [Assign]
Overwrite can delete
Are you sure?[Assign
Overwrite can delete
Are you sure?[Assign
.
.
–
Exit (or the
button) will cancel the
–
Load (Overwrite)?
Exit (or the
button) will cancel the
Load (Overwrite)?
File Loading...
File Loading...
Load Error
Load Error
Storage Mode
Storage Mode
Storage Mode
, and when complete
, and when complete
and a message
and a message
10-3
10-3
101
Advertisement
Table of Contents
