Panic; User Program 저장하기 - Kurzweil Artis SE Musician's Manual

If a MIDI Channel is disabled, the Program name is shown with parenthesis and the message
If a MIDI Channel is disabled, the Program name is shown with parenthesis and the message
MIDI 채널이 비활성화 된 경우, Program 이름은 괄호 안에 표기되며 윗줄에
"Channel disabled" on the line above.
"Channel disabled" on the line above.
"Channel disabled"라는 메시지가 나타납니다.
MIDI Channels are enabled/disabled in Global Mode, see Channel Enable (ChanEn) on
MIDI Channels are enabled/disabled in Global Mode, see Channel Enable (ChanEn) on
page 9-6.
page 9-6.

Panic

Panic
Panic
Program/Multi의 7 버튼과 8 버튼 (Panic) 을 동시에 누르면 모든 소리와
Pressing the 7 and 8 Program/Multi buttons (Panic) simultaneously deactivates all sounding
Pressing the 7 and 8 Program/Multi buttons (Panic) simultaneously deactivates all sounding
컨트롤 메시지를 중지시키고 "All Notes off" 메시지와 "Reset All Controllers"
notes and resets
notes and resets
메시지를 16개의 MIDI 채널에 모두 보냅니다.
Controllers" message on all 16 MIDI channels.
Controllers" message on all 16 MIDI channels.
User Program 저장하기
Saving User Programs
Saving User Programs
컨트롤러를 이용하여 현재 선택된 Program에 어떠한 변화가 발생한 경우,
Save 버튼에 불이 들어오며 변화가 있었음을 알려줍니다.
If you make changes to the current Program using any of the controllers, the Save button's
If you make changes to the current Program using any of the controllers, the Save button's
LED lights to indicate that a change has been made to that Program.
LED lights to indicate that a change has been made to that Program.
수정된 Program 음색을 저장하려면 Save 버튼을 눌러 저장 과정을 실행합니다.
Save 버튼의 불이 깜빡이며 Program의 번호와 이름을 설정할 수 있도록 합니다.
To save the changes you've made, press the Save
To save the changes you've made, press the Save
화면에는 저장 가능한 ID 번호와 현재 Program 음색의 이름이 표시됩니다.
to blink, allowing you to set the
to blink, allowing you to set the
ID number and the current Program name.
ID number and the current Program name.
Program Mode
Program Mode
Program Mode
Panic
Save button's LED begins
Save button's LED begins
Panic
Panic
6-11
6-11
63