P1B [Chk]<Cr - ICP DAS USA I-7565 User Manual

5.8 P1B [CHK]<CR>
Description: Change the CAN configuration of I-7565 module and then
reboot the I-7565 module.
Syntax: P1B[CHK]<CR>
P1
B
B
0
1
2
3
4
5
6
7
8
Response: A valid command will write the CAN configuration baud
rate into the EEPROM and then reboot the I-7565 module.
Note: It is necessary to enable the "Error Response" function in the I-
7565 Utility, in order to receive Syntax and/or communication error
information at the host PC.
Example:
Command: P14<CR>
Set the CAN baud rate=125K into the I-7565 module and
then reboot the I-7565 module.
I-7565 USB/CAN Converter User's Manual (Version 1.0, March/2007)
Command character
CAN Baud rate
Table 10: CAN baud rate list
10K baud rate of CAN
20K baud rate of CAN
50K baud rate of CAN
100K baud rate of CAN
125K baud rate of CAN
250K baud rate of CAN
500K baud rate of CAN
800K baud rate of CAN
1000K baud rate of CAN
Invalid command: ?<Error Code><CR>
Description
------------- 34