Command List - ICP DAS USA I-7565 User Manual

5. Command list

For easy application, we provide 9 command strings to allow users to
send and receive commands and responses through the I-7565. It can
cover most applications of different requests. The general formats of the
commands for the I-7565 are given below:
Command Format: <Command>[CHK]<CR>
<Command> : The commands of the I-7565 Converter.
[CHK] : 2-character checksum value. It is effective only if the
<CR> : All commands of the I-7565 Converter must end with the
The 9 command formats are given in the following table. More
detailed information related to of the each command will be described in
the following sub sections.
Command
tIIILDD...[CHK]<CR>
TIIIL[CHK]<CR>
eIIIIIIIILDD...[CHK]<CR> Send or receive an extended data frame.
EIIIIIIIIL[CHK]<CR>
S[CHK]<CR>
C[CHK]<CR>
P00E300SR[CHK]<CR> Change the USB configuration
P1B [CHK]<CR>
RA[CHK]<CR>
I-7565 USB/CAN Converter User's Manual (Version 1.0, March/2007)
checksum mechanism is set to enable by using I-7565
Utility.
character "<CR>" (The ASCII value is 13).
Table 5: Command list table
Send or receive a standard data frame.
Send or receive a standard remote frame.
Send or receive an extended remote frame.
Read the status value of I-7565
Clear CAN/USB FIFO error flag of overflow.
Change the CAN configuration
Reboot the I-7565 module.
Description
------------- 25