Verifying The Installation - ICP DAS USA I-7565 User Manual

3.1 Verifying the Installation:

This section will show you on how to verify whether the I-7565 was
properly installed. You will also need to determine the virtual COM port
assignment made by Windows for the USB to CAN converter.
Note: Before you connect the I-7565 for the first time, ensure that you do
not attach any serial devices to the converter. You must only connect the
I-7565 by itself.
To verify whether the device is properly installed and determine the COM
port assignment for the device:
1. Click "Start"
"System" icon. Once the System Properties window is display, click on
" Hardware" tab and then click on the
click on Ports (COM & LPT). If the device was correctly installed, you
should now see the I-756X Converter device listing. This also means
that Windows has assigned the device to the COM3 port.
I-7565 USB/CAN Converter User's Manual (Version 1.0, March/2007)
"Settings" "Control Panel", then double click on the
"Device Manager" button. Double-
------------- 16