P1B [Chk]<Cr - ICP DAS USA I-7530 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
BB
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
Response: A valid command will write the RS-232 configuration
parameters into the EEPROM and then reboot the I-7530 module.
Invalid command: ?<Error Code><CR>
Note: It is necessary to enable the "Error Response" function in the I-
7530 Utility, in order to receive Syntax and/or communication error
information at the host PC.
Example:
Command: P00B30000<CR>
Set the RS232 baud rate=115.2K, data bit=8, stop bit=1, none parity,
no checksum and No error responses into the I-7530 module and
then reboot the I-7530 module.
4.8 P1B [CHK]<CR>
Description: Change the CAN configuration of I-7530 module and then
reboot the I-7530 module.
Syntax: P1B[CHK]<CR>
P1
B
I-7530 RS-232/CAN Converter User's Manual (Version 1.0,Aug/2004, 7PH-021-01) ------------- 23
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Table 9: RS-232 baud rate list
110 bps baud rate of RS-232
150 bps baud rate of RS-232
300 bps baud rate of RS-232
600 bps baud rate of RS-232
1200 bps baud rate of RS-232
2400 bps baud rate of RS-232
4800 bps baud rate of RS-232
9600 bps baud rate of RS-232
19200 bps baud rate of RS-232
38400 bps baud rate of RS-232
57600 bps baud rate of RS-232
115200 bps baud rate of RS-232
230400 bps baud rate of RS-232
Command character
CAN Baud rate
Description