Reset Motherboard; Auto Set Basestation; Static Collection - Hi-Target V90 Plus Manual

HI-TARGET
trap power
button for
1 second
Shutdo Long
wn press
power
button for
3 seconds

Reset motherboard

The boot state, long press the button more than 6 seconds, voice reporting
second sound "ding dong", release the button, reset the motherboard.

Auto set basestation

Shutdown mode, press the button six seconds long, broadcast "is
automatically set base station", release the button, the instrument will
automatically set the base station

Static collection

V90Plus receiver can be used for static measurements, setting method to
double-click the button to enter the operating mode switching, double-click
each time a working mode switch; in operating mode switching process, click
the button to confirm, set up after the success of the red status light interval
seconds (depending set the sampling interval to be) flashes once they capture
one epoch. Static measurements collected data is stored in host memory card
(when the host memory below 2M, automatically switches to an external SD
22
lights on previous startup and Voice prompt of data
link mode
All indicator Shutdown music
lights off