Maintenance; Hygiene; Safety Conscious Operation; Safety Facilities - Schiller BR-102 PLUS User Manual

BR-102 plus / BR-102 plus PWA
User Guide

1.6 Maintenance

There are no serviceable parts inside. Refer servicing to qualified

technician authorised by SCHILLER only.
Do not use high temperature sterilisation processes (such as

autoclaving). Do not use E-beam or gamma radiation sterilisation.
Do not use solvent or abrasive cleaners on either the unit or cable

assemblies.
Do not, under any circumstances, immerse the device or cable

assemblies in liquid.

1.7 Hygiene

For cleaning and disinfection observe the legal requirements

applicable.
Only use cleaning agents and disinfectants recommended by

SCHILLER. Unsuitable agents can damage the device. Clean and
disinfect the device in accordance with the instructions given in
this book.

1.8 Safety Conscious Operation

Make sure that the staff have read and understood the operating

instructions - particularly this Safety Notes section.
Immediately report any changes that impair safety (including

operating behaviour) to the person responsible.
Only use accessories and other parts recommended or supplied

by SCHILLER AG. Use of other than recommended or supplied
parts may result in injury, inaccurate information and/or damage to
the recorder.

1.9 Safety Facilities

Connecting the unit to a PC with defective cables may constitute a

danger to life. Therefore:
– Do not connect the BR-102 plus / BR-102 plus PWA to any PC if
the earth connection is suspect or if the mains lead is damaged
or suspected of being damaged.
– Damaged cable connections and connectors must be replaced
immediately.
Safety Notes 1
Maintenance 1.6
Page 9