I
Manuale Operativo
Portare il manometro in pressione al 20% F.S., confermare con il tasto ENTER;
compare un valore, regolare il valore con i tasti
ENTER. Compare il parametro P2.
Portare il manometro in pressione al 40% F.S., confermare con il tasto ENTER;
compare un valore, regolare il valore con i tasti
ENTER. Compare il parametro P3.
Portare il manometro in pressione al 60% F.S., confermare con il tasto ENTER;
compare un valore, regolare il valore con i tasti
ENTER. Compare il parametro P4.
Portare il manometro in pressione al 80% F.S., confermare con il tasto ENTER;
compare un valore, regolare il valore con i tasti
ENTER. Compare il parametro P5.
Portare il manometro in pressione al 100% F.S., confermare con il tasto ENTER;
compare un valore, regolare il valore con i tasti
ENTER. Compare il parametro P6.
P1 (20% )
⇧
⇩, confermare con il tasto
P2 (40%)
⇧
⇩, confermare con il tasto
P3 (60%)
⇧
⇩, confermare con il tasto
P4 (80%)
⇧
⇩, confermare con il tasto
P5 (F.S.)
⇧
⇩, confermare con il tasto
GB
MO. DMM.414.R8
Set the manometer in pressure up to 20% of full scale, confirm through ENTER
key, a value appears, adjust the value through
key. P2 parameter appears.
Set the manometer in pressure up to 40% of full scale, confirm through ENTER
key, a value appears, adjust the value through
key. P3 parameter appears.
Set the manometer in pressure up to 60% of full scale, confirm through ENTER
key, a value appears, adjust the value through
key. P4 parameter appears.
Set the manometer in pressure up to 80% of full scale, confirm through ENTER
key, a value appears, adjust the value through
key. P5 parameter appears.
Set the manometer in pressure up to 100% of full scale, confirm through ENTER
key, a value appears, adjust the value through
key. P6 parameter appears.
page 27
Operating Manual
P1 (20%)
⇧ ⇩
keys, confirm with ENTER
P2 (40%)
⇧ ⇩
keys, confirm with ENTER
P3 (60%)
⇧ ⇩
keys, confirm with ENTER
P4 (80%)
⇧ ⇩
keys, confirm with ENTER
P5 (F.S.)
⇧ ⇩
keys, confirm with ENTER
Need help?
Do you have a question about the LAB-DM2 and is the answer not in the manual?