Suzuki NEXA BALENO Owner's Manual & Service Booklet page 66

FOR SAFE DRIVING
Driver's seat belt reminder
If the driver's seat belt remains unbuckled
when the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, the
reminder works as follows:
1) The driver's seat belt reminder light will
come on. The front passenger's seat
belt reminder light will also come on if a
front passenger does not fasten his/her
seat belt.
2) After the vehicle's speed has reached
about 15 km/h, the driver's seat belt
reminder light will blink and a buzzer
will sound for about 95 seconds.
3) The reminder light will remain on until
the driver's seat belt is buckled.
If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the
reminder system will be activated from
Step 1) or 2) according to the vehicle's
speed. When the vehicle's speed is less
than 15 km/h, the reminder will start from
Step 1). When the vehicle's speed is more
than 15 km/h, the reminder will start from
Step 2).
The reminder will be automatically can-
celed when the driver's seat belt is buckled
or the ignition switch is turned to off, or the
engine switch is pressed to change the
ignition mode to LOCK (OFF).
2-25
Front passenger's seat belt reminder
If there is a person sitting in the front pas-
senger seat and the front passenger seat
belt is unbuckled when the ignition switch
is turned to "ON" position or the engine
switch is pressed to change the ignition
mode to ON, the front passenger's seat
belt reminder will activate.
(2)
(2) The sensor of the front passenger's
seat belt reminder
The seat belt reminder sensor (2) detects
whether a person is sitting in the front seat.
The sensor of the front passenger's seat
belt reminder is located in the seat cush-
ion. The front passenger's seat belt
reminder works in the same manner as the
driver's seat belt reminder.
NOTICE
• The sensor of the front passenger's
seat belt reminder is located in the
seat cushion. If heavy or sharp
objects are put on the seat cush-
ion, or a removal, disassembly and
modification of the passenger's
seat are performed, the sensor may
not work properly or can be dam-
aged. Do not put heavy or sharp
objects on the seat cushion. Do not
remove, disassemble and modify
the passenger's seat.
• Depending on the variety of seat
cover, operation of the sensor may
be adversely
Suzuki highly recommends that
you use Maruti Suzuki genuine seat
cover exclusively for this vehicle. If
a seat cover is installed, consult
with Maruti
workshop.
69RH203
• If you spill liquid such as liquid aro-
matics, soft drinks or juice on the
front passenger's seat cushion, the
sensor of the front passenger's
seat belt reminder located in the
seat cushion can be damaged.
Immediately wipe it dry with a soft
cloth when spilled.
affected. Maruti
Suzuki authorised
(Continued)