Suzuki NEXA BALENO Owner's Manual & Service Booklet page 63

To reduce the risk of sliding under the belt
during a collision, position the lap portion
of the belt across your lap as low on your
hips as possible and adjust it to a snug fit
by pulling the shoulder portion of the belt
upward through the latch plate. The length
of the diagonal shoulder strap adjusts itself
to allow freedom of movement.
Low on hips
59RN02320
To fasten the seat belt, sit up straight and
far back into the seat, pull the latch plate
attached to the seat belt across your body
and press it straight into the buckle until
you hear a click. After pressing the latch
plate into the buckle, pull the seat belt to
make sure it is securely latched. After
pressing the latch plate into the buckle,
pull the seat belt to make sure it is securely
latched.
59RN02330
To unfasten the seat belt, push the red
"PRESS" button on the buckle and retract
the belt slowly while holding the belt or/and
the latch plate.
NOTE:
If the seat belt cannot be pulled from its
fully retracted position, firmly pull the belt
and release it. Then smoothly pull the belt
out of the retractor.
Adjustment of Seat Belt Length
The seat belt does not require length
adjustment. The seat belt extends and
retracts according to the movement of the
body. If the seat belt gets a strong impact,
the belt locks its tension automatically, in
order to secure the body.
FOR SAFE DRIVING
59RN02340
2-22