Suzuki NEXA BALENO Owner's Manual & Service Booklet page 244

OPERATING YOUR VEHICLE
• When you press the camera switch, the current image will be changed to the previous image.
• Even when you do not press the camera switch, the current image will be changed to the previous image by the following methods:
– When 3 minutes passed after you press the camera switch
– When you operate the infotainment system
– When the vehicle speed becomes over about 10 km/h
• When the vehicle speed becomes over about 10 km/h and you press the camera switch, you can display the side image on the screen.
When the vehicle speed becomes about 10 km/h or less, the forward image will be displayed on the screen.
NOTE:
• For manual transmission vehicle, you can adjust the image quality and set up the initial display image when the gearshift lever is in
other than "R", parking brake is applied and the vehicle is stopped.
• For Auto Gear Shift vehicle, you can adjust the image quality and set up the initial display image when the gearshift lever is in "N" posi-
tion, the parking brake is applied and the vehicle is stopped.
• When the engine switch is in ACC mode, the camera image will not be displayed.
5-59