Suzuki NEXA BALENO Owner's Manual & Service Booklet page 121

WARNING
(Continued)
– When you open or close the front
passenger's window or the rear
windows on the driver's side,
check that the other passengers
and children do not take their
hands and faces outside the vehi-
cle, before the window operation.
Also, make sure to inform them
that you will perform the window
operation.
• When you operate the electric win-
dow controls from the outside of
the window, your hands or neck
may be caught by the window and
an accident may occur. Do not
operate the electric window con-
trols from the outside of the win-
dow.
NOTE:
If you drive with one of the rear windows
open, you may hear a loud sound caused
by air vibration. To reduce the sound, open
the driver's or front passenger's window, or
narrow the rear window opening.
Pinching Prevention Function
The driver's window is equipped with a
pinching prevention function. This function
detects a foreign object that is caught in
the window as it is being closed by AUTO-
UP feature, which allows you to close the
window without holding the window switch
in UP position, and stops the window from
closing to prevent damage.
WARNING
The function may not detect the
object depending on shape, size,
hardness and position of the object
caught by the closing window. This
may cause severe injury.
Be very careful when opening or
closing the windows.
BEFORE DRIVING
CAUTION
• The pinching prevention function
does not operate while you are
holding the window switch in UP
position.
• The pinching prevention function
may not detect an object caught in
the window just before the window
is fully closed.
NOTE:
Even if you cannot close the window by the
AUTO-UP feature because there may be
something wrong with the pinching preven-
tion function, you can close the window by
holding the window switch in UP position.
If you drive in extreme off-road condition,
the pinching prevention function may oper-
ate accidentally because the window
reacts to vehicle jolting.
Pinching prevention function initializa-
tion
When you disconnect and reconnect the
lead-acid battery or replace the fuse, the
function will be deactivated. In this condi-
tion, the AUTO-DOWN feature will be
deactivated, while the AUTO-UP feature
may remain activated. The pinching pre-
vention function needs to be initialized.
3-20