Suzuki NEXA BALENO Owner's Manual & Service Booklet page 197

Table of Contents

Advertisement

2) Within about 10 seconds while the
master warning indicator light blinks
and the information display in the
instrument cluster shows the following
message, touch the engine switch with
the lock switch end of the remote con-
troller (2) for about 2 seconds.
While the master warning indicator light
blinks, the immobilizer/keyless push sys-
tem warning light will come on for about 5
seconds.
If you still cannot select the ignition modes,
there may be the other problem such as
the discharged lead-acid battery. In this
case, consult a Maruti Suzuki authorised
workshop.
NOTE:
• You may customize the system to cause
the interior buzzer to sound once for
warning that remote controller is out of
sensing range. For this customization,
consult a Maruti Suzuki authorised work-
shop.
• If the battery of the remote controller is
almost discharged, the information dis-
play in the instrument cluster shows the
following message when you press the
engine switch to change the ignition
mode to ON. Refer to "Information Dis-
play" in "INSTRUMENT CLUSTER" sec-
tion for details. For details on replacing
the battery, refer to "Keyless Push Start
System Remote Controller" in "BEFORE
DRIVING" section.
55T040100
OPERATING YOUR VEHICLE
Remote Controller Outside Warning
When either of the following conditions is
met, the system causes the remote con-
troller outside warning by sounding the
interior and exterior buzzers. At the same
time, the immobilizer/keyless push start
system warning light comes on, the master
warning indicator light blinks and the infor-
mation display in the instrument cluster will
show the corresponding message.
• Any door is opened and then closed
while the remote controller is not inside
the vehicle and the engine is running or
the ignition mode has been changed to
ACC or ON by pressing the engine
switch.
• The remote controller is not inside the
vehicle when you attempt to start the
engine after changing the ignition mode
to ACC or ON by pressing the engine
switch.
55T040120
5-12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents