Suzuki NEXA BALENO Owner's Manual & Service Booklet page 126

BEFORE DRIVING
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Turn the ignition switch to "ACC" or "ON"
position or change the ignition mode to
ACC or ON by pressing the engine
switch.
• Turn the lighting switch to any other
position than "AUTO" position.
NOTE:
• When the "To home" is functioning, the
front fog lights (if equipped), rear fog
light (if equipped) and the headlights
(high beam) are not turned on.
• Lighting time of the "To home" function
can be changed on the information dis-
play. Refer to "Information display" in
"INSTRUMENT CLUSTER" section.
"To car" function
Before you get in the vehicle, the ground
will be illuminated for a short while to easily
lead the driver to the vehicle. If UNLOCK
button of the keyless push start system
remote controller is pressed while the light-
ing switch is positioned in "AUTO", the
front position lights and the headlights in
the low beam are turned on for 10 sec-
onds.
This function will operate only when it is
dark outside the vehicle.
3-25
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the keyless
push start system remote controller, the
request switch or the key in the driver's
door lock.
• Change the ignition mode to ACC or ON
by pressing the engine switch.
• Turn the ignition switch to "ACC" or "ON"
position or change the ignition mode to
ACC or ON by pressing the engine
switch.
NOTE:
• When the "To car" is functioning, the
front fog lights (if equipped), rear fog
light (if equipped) and the headlights
(high beam) are not turned on.
• Lighting time of the "To car" function can
be changed on the information display.
Refer to "Information
"INSTRUMENT CLUSTER" section.
Front Fog Light Switch
(if equipped)
To turn the front fog light on, twist the knob
as shown in the illustration with the posi-
tion lights, tail lights and/or the headlights
display" in
are on. When the front fog light is on, an
indicator light on the instrument cluster will
come on.
NOTE:
In some countries the lighting operation
may be different from the above descrip-
tion according to local regulations.
55T030110