Suzuki NEXA BALENO Owner's Manual & Service Booklet page 369

(7)
(5)
(4)
3) Remove the wire (4) from a clamp (5).
4) To remove the bulb holder of the rear
turn signal light (6) or the reversing light
(7) from the light housing, turn the
holder counterclockwise and pull it out.
(6)
(8)
(9)
55T090400
(8) Removal
(9) Installation
5) To remove the bulb of the rear turn sig-
nal light (6) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise.
To remove and install the bulb of the
reversing light (7), simply pull out or
push in the bulb.
(7)
(6)
55T090410
INSPECTION AND MAINTENANCE
NOTE:
When reinstalling the light housing, check
that the clips are properly attached.
55T090420
9-34