Pump Connections - Stuart Turner CH 4-30 PS Installation, Operation & Maintenance Instructions Manual

5

PUMP CONNECTIONS

5.11 Hose to pump: These pumps have G 1 threaded connections to accept the
hoses supplied. The hose end is made water tight with a sealing washer on
assembly, nip tight to 4/5 Nm for water tight seal (Do not overtighten).
5.12 Hose to pipework: Hoses terminating in G 1 threaded connections are
supplied and when securing the male end to a suitable pipe fitting, seal with
PTFE tape or other suitable sealant.
- 9 -
Cont ...