Table of Contents
Advertisement
7.3
Ethernet 1 Network Settings
To change the IP Settings, follow these instructions:
•
Enable DHCP to automatically assign IP Settings or modify the IP Settings manually as needed, via these fields: IP
Address, Netmask, Default Gateway, and Domain Name Server1/2.
NOTE: If the FieldServer is connected to a router, the IP Gateway of the FieldServer should be set to the same
IP Address of the router.
•
Click Save to record and activate the new IP Address.
•
Connect the FieldServer to the local network or router.
NOTE: The browser will need to be pointed to the new IP Address of the FieldServer before the settings will be
accessible again.
26
QuickServer FS-QS-1XXX Start-up Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the QuickServer FS-QS-1 Series and is the answer not in the manual?
Questions and answers