Image Flip; Input Select Menu; Main Source - Barco MDSC-8532 User Manual

Advanced operation
The Pan function is only available when the Zoom function is selected.
To pan the image
1. Bring up the OSD main menu.
2. Navigate to the Picture Advanced menu.
3. Enter the Pan submenu.
The pan command bar is highlighted.
4. Move the image as desired with the Up/Down/Left/Right arrows.

4.2.5 Image flip

This function is not available when DisplayPort mode is set to DP 1.2 MST.
About image flip
This function allows you to flip the image on your display.
The available options are:
• Disabled (no image flip applied)
• Mirror (flips the image horizontally, making the left content appear on the right and vice versa)
• Rotation (rotates the image 180° = Hor + Ver flip)
When image rotation is selected, the latency will increase with 20 msec. Image mirroring does not
cause any latency increase.
To enable/disable horizontal flip
1. Bring up the OSD main menu.
2. Navigate to the Picture Advanced menu.
3. Enter the Image Flip submenu.
4. Select one of the available options and confirm.

4.3 Input select menu

4.3.1 Main source

About main sources
The available main sources for your display are:
• DVI
• SDI 4K (*)
• SDI
• DisplayPort
• HDMI-1
• HDMI-2
• Auto Search
(*) 12GP version only.
Available main source options may differ depending on display model.
30 R5914105 /01 MDSC-8532