VENETA 65101-40168-E How To Install

How to install your
Dual Blinds Cordless
(Roller Blinds with Raceway)
#65101-40168-E
measuring

Required Tools

tape

Installing inside the window frame

Included Hardware

1

Blind Bracket Installation

The hardware can be found in
the small hardware box included
with your blind.
3
32mm Hexagon
Insert the top light guard holder horizontally into the groove at the backside of raceway
Screw
and turn 90 degrees to lock in the raceway groove. Then insert the top light guard into
(for Mounting Bracket)
the groove of the top light guard holder.
19mm Round Head
Screw
6
Blind Bracket Cover
Top Light Guard
Holder
Backside of Raceway
(for Inside Mount)
Mounting Brackets
(for Outside Mount)
Traditional Hold
Down Bracket
(Optional)
Handle
Difficulty:
drill with phillips bit or pencil
2mm bit screwdriver
6
How to install your
Dual Blinds Cordless
(Roller Blinds with Raceway)
#65101-40168-E
knife
Installation
continued...
1

Installing outside the window frame

1
Blind Bracket Installation
Measure 75mm in from top left and top right of where the
①
blind will sit, and mark where the screws will go.
When installing the mounting bracket, the distance from the
②
bracket's mounting hole to the edge of the window frame
should be at least 19mm.
③ Make sure all brackets line up with each other horizontally.
Each bracket will require two 32mm hexagon screws for the
installation.
④ If more brackets are supplied, space them evenly between
the first two brackets.
Difficulty:
19mm
2