ZiLOG Z8 Encore! XP F64 Series User Manual page 6

installing the package adapter that came with your kit into the compatible
socket on a target board such as the Z8 Encore! XP
opment Board; connecting the emulator to a PC; and connecting the emu-
lator to the target.
You may have to reconfigure network settings on the PC or on the Z8
Encore! XP
1. Install the Z8 Encore! XP
2. Connect the CAT-5 crossover cable from the PC to the Ethernet port
Note: If you prefer, you can connect the emulator to an Ethernet hub
using a standard CAT-5 patch cable.
3. Connect the serial COM port on the PC to the serial port on the Z8
Figure 1. Connecting a PC to the Z8 Encore! XP
UM016804-0208
®
F64xx Series ICE before using the emulator.
the socket on your target board, being sure to line up the guide pins
with the guide pin holes on the socket.
on the Z8 Encore! XP
®
Encore! XP F64xx Series ICE using the DB9-to-DB9 serial cable.
See Figure 2.
CAT-5 Crossover Cable
PC
DB9-to-DB9 Cable
®
F64xx Series MCU package adapter into
®
F64xx Series ICE. See
Z8 Encore! XP
F64xx Series
®
In-Circuit Emulator
User Manual
®
F64xx Series Devel-
Figure 1.
ICE
F64xx Series ICE
3