ZiLOG Z8 Encore! XP F64 Series User Manual page 10

F64xx Series ICE, you must either change the PC's Ethernet settings to
match those of the Z8 Encore! XP
If using the PC in a stand-alone configuration, set the PC's IP address to
192.168.1.21 and its subnet mask to 255.255.255.0. See "Changing the
PC's Settings to Match the Z8 Encore! XP® F64xx Series ICE" on
page 7.
If working in a networked environment, set the Z8 Encore! XP
Series ICE IP address and subnet mask to match the existing network
setup. See "Changing Z8 Encore! XP® F64xx Series ICE Settings to
Match the PC" on page 12.
Changing the PC's Settings to Match the Z8 Encore! XP
F64xx Series ICE
After completing the following steps to change the PC's Ethernet settings,
proceed to
The following instructions are for MS Windows XP. If your Win-
Note:
dows operating system is different, refer to your MS Windows OS
online help for details.
1. Open the Windows Control Panel and double-click the Network Con-
UM016804-0208
Running a Sample Project
nections icon. The Network Connections dialog box appears (see
Figure 6).
In-Circuit Emulator
®
F64xx Series ICE or vice versa.
on page 14.
User Manual
7
®
F64xx
®