ESAB Warrior 750i CC/CV Instruction Manual page 13

3 TECHNICAL DATA
GMAW
GTAW
SMAW
Gouging
Open-circuit voltage without
VRD function (RMS/Peak)
Operating temperature
Transport temperature
Constant sound pressure when
idling
Dimensions l × w × h
Weight (welding power source)
Insulation class
Enclosure class
Application class
Mains supply, S
sc min
Minimum short circuit power on the network in accordance with IEC 61000-3-12.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 104 °F (40 °C) or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
0463 730 001
Warrior 750i CC/CV
91%
61/94 V DC
14 to 104 °F (-10 to 40 °C)
-4 to 131°F (-20 to 55°C)
<70 dB (A)
33.5×16.3×25.1 in. (850×415×637 mm)
231.5 lb (105 kg)
H
IP23
- 13 - © ESAB AB 2021