Table of Contents
Advertisement
SigmaPace 1000
Operators Manual
International customers should contact their Fluke Biomedical dealers for
service/product support.
To obtain the name of your local dealer or service center, contact Fluke
Biomedical as indicated under "Return Procedures, Repair and calibration."
Packing Instructions
If calibration or repairs are required, return the Analyzer to the factory or the
nearest service center.
1. Before returning the Analyzer for factory service, contact the Fluke
Biomedical Service Center for a required Return Authorization Number.
2. Provide the following information:
•
The Analyzer serial number
•
The specific steps that reproduce your problem
•
A daytime phone number
•
Your name/company
•
A fax number (if available)
3. Pack the instrument carefully, using the original packing materials. If the
original packing materials are not available, refer to "Return Procedures"
for a list of preferred materials or contact Fluke Biomedical for
replacement packing. Failure to pack the instrument properly could void
your warranty.
Shipping
4. Place the Return Authorization Number in a prominent place on the
outside of the packing box, and refer to the number in any correspondence
with Fluke Biomedical Service.
5. Enclose your return address and Return Authorization Number.
6. Insure the unit for full retail value and ship to the nearest Fluke
Biomedical service center.
2-10
Advertisement
Table of Contents
