Table of Contents
Advertisement
6. Press F2 RATE to toggle between NORM and <20.
The RATE <20 is used to measure pacer activity under the rate of 20
PPM. The sampling time is extended to accommodate this lower rate.
7. Press F4 LOAD UP or DOWN arrow key to select the desired load for
the selected channel.
8. Press F1 HOLD to advance the screen:
9. Press F4 XMIT DATA to transmit data through the serial port.
10. Press F1 RELEASE to release the hold and return to the HOLD screen.
Transvenous Pacemaker Testing
F1
F2
Note
F1
F2
Setup and Testing
F3
F4
F3
F4
4
eyr038.eps
eyr016.eps
4-15
Advertisement
Table of Contents
