Logon Screen - ADC HiGain H2TU-C-202 Manual

Provisioning
Table 3 summarizes the navigational keys. They are also listed in the onscreen Help menu.
describes the menus.
Table 3. Navigational Keys for the HiGain HDSL2 Maintenance Terminal Screens
(a)
Key
SPACEBAR
ENTER
ESC F11
or (VT100)
CTRL E
↑ or +
CTRL X
↓ or +
→
or CTRL + D
←
or CTRL + S
+ R
CTRL
(a) Legacy management units require use of control keys instead of arrow keys.
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, see the Help menu for instructions.
Monitor Performance
ID: xxxx--xxxx--xxxx—-xxxx
Circuit ID
10
Function
Cycle through selections.
Activate the current setting or choice, or display a menu.
Return to the parent menu.
Select the submenu or item above the current one, or return to the previous menu.
Select the submenu or item below the current one.
Select the menu or item to the right of the current one.
Select the menu or item to the left of the current one, or return to the previous menu.
Refresh the screen.
Menu bar
Event Log Config
+------------------------------------------+
|
| ADC DSL Systems, Inc.
| HiGain HDSL2
|
| Voice:
| Fax :
+------------------------------------------+
02/01/2001 12:30:01
Date and Time
Figure 5. Logon Screen
February 28, 2001
Inventory Report Rlogon
800.638.0031
714.832.9924
H2TU-C
Logon Device
LTPH-TP-1005-02, Issue 2
Table 4 on page 11
Help
|
|
|
|
|
|
System: OK___
System Status
H2TU-C-202 List 3E