Provisioning
To clear the Event Log, type
To clear an individual history or alarm screen, do the following:
1
Press
P
to select the Performance screen.
2
Press the
SPACEBAR
H2TU-R HDSL2), then press
SPACEBAR
3
Press the
48 Hour History, or 31 Day History) and press
–
Selecting 31 Day History allows you to clear the Current, 25 Hour, 48 Hour, and 31 Day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 Alarm screens, see
4
Press
L
to clear the screen.
To clear ALL history, alarm, and event log screens:
1
Press
C
to select the Config screen.
2
Use the
↑
and
3
Press
Y
to clear all screens.
26
E
to select the Event Log screen, then type
to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2 or
ENTER
.
to select the type of statistics (Current, Alarm History, 25 Hour History,
↓
arrow keys to select Master Clear.
February 28, 2001
L
to clear the screen.
ENTER
after your selection.
Table 17 on page
LTPH-TP-1005-02, Issue 2
37.
H2TU-C-202 List 3E