Logon Screen - ADC HIGAIN HDSL2 Manual

Provisioning

Logon Screen

The HiGain maintenance terminal screens allow you to monitor, provision, and troubleshoot an HDSL2 system.
To select a menu from the HiGain HDSL2 logon screen
•
Press the first letter of the menu.
← →
•
Use the arrow keys to select the menu, and then press
Table 3 summarizes the navigational keys. They are also listed in the onscreen Help menu.
describes the Logon screen menus.
Table 3. Navigational Keys for the HiGain Maintenance Terminal Screens
(a)
Key
SPACEBAR
ENTER
ESC F11
or (VT100 only)
CTRL E
↑ or +
or CTRL + X
↓
→
or CTRL + D
←
or CTRL + S
CTRL + R
(a) Legacy management units require use of control keys instead of arrow keys.
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, see the Help menu for instructions.
10
(Figure 3 on page
Function
Cycle through selections.
Activate the current setting or choice, or display a menu.
Return to the parent menu.
Select the submenu or item above the current one, or return to the previous menu.
Select the submenu or item below the current one.
Select the menu or item to the right of the current one.
Select the menu or item to the left of the current one, or return to the previous menu.
Refresh the screen.
October 2, 2000
152-231-116-01, Revision 01
11), do one of the following:
ENTER .
Table 4 on page 11
H2TU-C-231 List 1F