Table of Contents
Advertisement
Installing Multiplexers
Entering the Card ID (System Name) Through the Config Menu
Main
Monitor
History
ID:
| Card 'A'
Step
Procedure
1
From the System submenu, choose Card ID, and then press
Card ID is used to identify multiplexer to STS-1 network connection.
2
Type a name for the card (network element name), and then press
The name typed is attached to both cards in a protected system.
Card A is the multiplexer in slot A; Card B is the multiplexer in slot B.
3
Exit the Config menu by pressing
4
Proceed to
"Setting the System Clock Synchronization Through the Config Menu" on page
?
Installer Signature
44
Config
Test
Inventory
+----------Set Card ID------------+
|
Date and Time
| +-----------------------------+ |
| |
| ID:
| |
| +-----------------------------+ |
|
Date and Time
+---------------------------------+
10/01/01 10:42:47
Figure 30. Setting the Card ID Through the HXU-359
ESC
.
July 14, 2002
Quit
Help
|
| |
| |
| |
|
ALARMS: NONE
ENTER
.
ENTER
.
45.
LTPH-SM-1052-04
Installer Check ü
H
H
H
H
Date
HMS-358 List 5 and List 6
Advertisement
Table of Contents
