Selecting The Proper Installation Procedures; Installing Interface Cables-Ds3 Or Sts-1 To Dsl; Selecting The Proper Tabbed Section For Your Shelf Configuration - ADC WIDEBAND 3190 Installation And Verification Manual

LTPH-SM-1052-04
S
ELECTING THE
This guide identifies the cable installation procedures for each shelf configuration with a tabbed section title
(Figure 6).
Installing Interface Cables
S C
HELF ONFIGURATION
Figure 6. Selecting the Proper Tabbed Section for Your Shelf Configuration
Select the tabbed section that applies to your configuration and only follow those procedures:
•
DS3 or STS-1 to DSL configuration (see
•
DSX-1 to DSL (Port 1), no multiplexer configuration (see
(Port 1)" on page
• DSX-1 to DSL (Port 2), multiplexed network configuration (see
(Port 2)" on page
HMS-358 List 5 and List 6
P I
ROPER NSTALLATION
"Installing Interface Cables—DS3 or STS-1 to DSL" on page
13)
14)
P
ROCEDURES
"Installing Interface Cables—DSX-1 to DSL
"Installing Interface Cables—DSX-1 to DSL
July 14, 2002
Cabling the Chassis
12)
11