Provisioning Tasks; Setting Date And Time; Config Menu - ADC HiGain H2TU-C-231 List 3F User Manual

Provisioning
P T
ROVISIONING
After the H2TU-C is successfully installed, perform these basic provisioning tasks:
• Set date and time (see
• Set circuit ID numbers (see
• Make any configuration changes (see
• Clear history, alarm, and event log screens to remove miscellaneous data acquired during startup (see
"Clearing the History, Alarm, and Event Log Screens" on page

Setting Date and Time

Monitor Performance
ID: xxxx--xxxx--xxxx—-xxxx
1 Press C to select the Config menu.
2 Use the and
↑ ↓
3 Type the date in the format indicated, then press
4 Type the time in the format indicated (entering seconds is optional), then press
12
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
"Configuring the System" on page
Event Log Config
+-----------------------+
| Standard Options
| ADC Options
| Date and Time
+---------------------------------+
| Date (mm/dd/yyyy) :
| Time (hh:mm[:ss]) : 23:50:38
+---------------------------------+
04/10/2002 23:50:43
Figure 4. Config Menu - Date and Time
arrow keys to select Date and Time, then press
June 12, 2002
on this page).
13).
14).
25).
Inventory Report
-> |
-> |
->.|
04/10/2002
H2TU-C
ENTER
ENTER
.
LTPH-UM-1149-01
Rlogon Help
|
|
System: OKarm
.
ENTER
.
H2TU-C-231 List 3F