Provisioning Tasks; Setting Date And Time; Config Menu - ADC HiGain H2TU-C-231 Manual

LTPH-TP-1034-01, Issue 1
P T
ROVISIONING
After H2TU-C-231 is successfully installed, perform these basic provisioning tasks.
1 Set the date and time (see
2 Set the circuit ID number (see
3 Make any configuration changes (see
4 Clear history, alarm, and event log screens to remove miscellaneous data during startup (see
History, Alarm, and Event Log Screens" on page

Setting Date and Time

Monitor Performance
ID: xxxx--xxxx—-xxxx--xxxx
1 Press C to select the Config menu.
2 Use the and
↑ ↓
3 Type the date in the format indicated, then press
4 Type the time in the format indicated (entering seconds is optional), then press
H2TU-C-231 List 4E
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
"Configuring the System" on page
Event Log Config
+----------------------+
| Standard Options ->
| ADC Options
| Date and Time
+-------------------------------+
| Date (mm/dd/yyyy): 09/01/2001|
| Time (hh:mm[:ss]): 12:30:01
+-------------------------------+
09/01/2001 12:30:01
Figure 4. Config Menu - Date and Time
arrow keys to select Date and Time, then press
September 28, 2001
on this page).
14).
15).
26).
Inventory Report Rlogon
|
-> |
-> |
H2TU-C
ENTER .
ENTER .
Provisioning
"Clearing the
Help
|
System: OK___
ENTER .
13