Provisioning Tasks; Setting Date And Time; Config Menu - Date And Time - ADC HiGain H2TU-C-319 List 4E User Manual

Provisioning
P T
ROVISIONING
After the H2TU-C is successfully installed, perform these basic provisioning tasks:
• Set date and time (see
• Set circuit ID numbers (see
• Make any configuration changes (see
• Clear history, alarm, and event log screens to remove miscellaneous data during startup (see
History, Alarm, and Event Log Screens" on page

Setting Date and Time

Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
1 Press C to select the Config menu.
2 Use the and
3 Type the date in the format indicated, then press
4 Type the time in the format indicated (entering seconds is optional), then press
14
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
"Configuring the System" on page
Event Log Config
+-----------------------+
| Standard Options
| ADC Options
| Test Mode
| Date and Time
+---------------------------------+
| Date (mm/dd/yyyy) :
| Time (hh:mm[:ss]) : 06:40:11
+---------------------------------+
08/01/2001 06:38:12
Figure 4. Config Menu - Date and Time
arrow keys to select Date and Time, then press
January 9, 2002
on this page).
15).
16).
33).
Inventory Report Rlogon
-> |
-> |
-> |
-> |
08/01/2001
H2TU-C
ENTER
ENTER .
LTPH-UM-1049-02, Issue 2
"Clearing the
Help
|
|
System: OK
.
ENTER .
H2TU-C-319 List 4E