Table of Contents
Advertisement
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1. Go to Configuration → Record → Storage .
2. Click Add.
3. Set NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click
to search the available disks.
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK.
Note
Up to 8 TB storage capacity is allowed for each network disk.
Result
The added network disks will be displayed in the storage device list.
6.5.4 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced .
2. Configure the parameters as your desire.
Overwrite
Network Video Recorder User Manual
Figure 6-28 Add NetHDD
70
Advertisement
Table of Contents
