Safety Instructions - Kontron CP-RIO6-923 User Manual

Safety Instructions

Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its
compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the
life expectancy of your product can be drastically reduced by improper treatment during unpacking and
installation. Therefore, in the interest of your own safety and of the correct operation of your new Kontron
product, you are requested to conform with the following guidelines.
All operations on this device must be carried out by sufficiently
skilled personnel only.
Do not connect a switch port to a telephone line.
For installation in a Hot-Plug system, observe the safety instructions
specific to the system. Read the relevant documentation.
Electric Shock
High voltages are present inside the chassis when the unit's power
cord is plugged into an electrical outlet. Turn off system power, turn
off the power supply, and then disconnect the power cord from its
source before removing the chassis cover. Turning off the system
power switch does not remove power to components.
WARNING
WARNING
WARNING
CAUTION
x
Preface
CP-RIO6-923 User Guide
www.kontron.com