EAS Electric ECMV2 Series Owners And Installation Manual page 91

Hang the intake grille on the panel, and
then connect the lead connectors of the
louver motor and the control box on the
panel to the corresponding connectors of
the main body.
Install cover rope
Panel hook
Re-installed into the style grid.
Reinstall the installation cover.
Fix the installation cover plate rope to the
pillar of the installation cover plate, and
gently press the installation cover plate
into the panel.
NOTE: After installation, the plugs of
display, swing, water pump and
other wire bodies must be placed in
the electric control box.
Bolt
When installing the co-
ver, slide the four slide
fasteners into the corres-
ponding slots on the pa-
nel.
45 V.2