Table of Contents
Advertisement
Background : Transparent
Color : background color
Scroll Speed : 0-16
Scroll Direction : Scroll Off, Scroll Left, Scroll Right
Input Text : The exact content of the text.
Save OSD : save what you have set in previous steps
Clear OSD : clear OSD if the setting is not desired
Close All OSD : close all OSD shown on the screen
Steps of OSD Set are as follows：
Precondition: The Display Management of output ports
has been completed before the OSD Set.
1. Open OSD Status.
2. Position: If the width of a single output is 1920 and the
OSD will be displayed on the screen which is
four outputs horizontally, then type
is, the width of the four outputs).
3. Font: choose font type,size and color.
4. After all settings done,click<Set> and the OSD will be
displayed on the screen.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
spliced by
7680 for width (that
support@rgblink.com
|
www.rgblink.com
16 / 30
Advertisement
Table of Contents
