Introduction; Features - Microchip Technology SAM-IoT Wx v2 Hardware User's Manual

1.

Introduction

1.1

Features

The following are key features of the SAM-IoT WG v2 development board:
• ATSAMD21G18A
• ATWINC1510
• ATECC608B
• Pre-configured for Microchip accounts with cloud service providers
– Google Cloud IoT Core
• Four user LEDs
• Two mechanical buttons
• TEMT6000 light sensor
• MCP9808 temperature sensor
• mikroBUS socket
• On-board debugger
– Board identification in Microchip MPLAB X IDE
– One green board power and status LED
– Virtual serial port (USBCDC)
– One logic analyzer channels (debug GPIO)
• Supports drag-and-drop feature
• USB and battery powered
• USB2422T USB hub
• MIC33050 Buck regulator
• MCP73871 Li-Ion/Li-Polymer battery charger
• Fixed 3.3V
©
2022 Microchip Technology Inc.
and its subsidiaries
® ®
Arm Cortex -M0+ microcontroller
Wi-Fi module
™
CryptoAuthentication device
User Guide
SAM-IoT Wx v2
Introduction
DS70005506A-page 4