Supplemental Characteristics - Delta D750 User Manual

User Manual
D750
DC Power Supply
SAFETY/EMC
Applicable standards:
Withstand voltage
Insulation resistance
Conducted emission
Radiated emission
NOTES:
*1: Minimum voltage is guaranteed to maximum 0.2% of the rated output voltage.
*2: Minimum current is guaranteed to maximum 0.4% of the rated output current.
*3: At 100-240Vac (50/60Hz) input voltage, with rate output power.
*4: 在 100/200V 输入电压和最大输出功率
*5: At 85~265Vac or 170~265Vac, constant load.
*6: From No-load to Full-load, constant input voltage Measured at the sensing point in
Remote Sense.
*7: 负载电压变化范围为电源额定电压，输入电压恒定。
*8: 纹波在输出电压为 10-100％和输出下测得
*9: For load voltage change, equal to the unit voltage rating, constant input voltage.
*10: 额定电阻负载。

1.4 Supplemental Characteristics

The supplemental characteristics give typical but non-warranted performance
characteristics. The supplemental characteristics are useful in assessing applications for
the power supply. Several kinds of supplemental characteristics are listed below.
1. Evaluation Data: Typical performance of the power supply.
2. Reliability Data: Reliability performance of the power supply.
3. EN61000 Data: Performance of the power supply under EN61000 test conditions.
4. EMI Data: Typical EMI (conducted and radiated) performance of the power supply.
The supplemental characteristics data is held in each DELTA sales and service facility. For
further details please contact the DELTA office nearest you.
11 │ www.deltaww.com
Safely CE Mark, EN61010 listed Output is hazardous
EMC EN55011
Input-Outputs (SELV): 3.0KVrms 1min,
Input-Ground: 1.5KVrms 1min.
More than 100Mohm at 25 ºC, 70% RH.
EN 55011:2009+A1:2010, Group I, Class A
EN 55011:2009+A1:2010, Group I, Class A