Locked Front Panel; Rear Panel - Delta D750 User Manual

User Manual
D750
DC Power Supply

3.1.3.2 Locked front panel

In this mode the following front panel controls are disabled:
-VOLTAGE and CURRENT encoders.
-FOLD button.
-OUT button.
The power supply will not respond to attempts to use these controls. The VOLT display
will show "LFP" to indicate that the front panel is locked.
OVP/UVL button is active to preview the OVP and UVL setting.
Use PREV button to preview the output voltage and current setting or to unlock the front panel.

3.1.4 Rear Panel

See Fig.3-2 to review the connections and controls located on the power supply rear panel.
Refer to Table 3-2 for explanations about the rear panel connections and controls.
Table 3-2: Rear panel connections and controls
Number
1
2
29 │ www.deltaww.com
2
7 6
Fig.3-2: Rear panel connections and controls
Item Description
AC input Header with a screw plug connector.
connector
DC output Wire clamp connector.
LFP
8
4 3 5 1
Section